 Stock injectors on a 2.1L?, Instead of webers |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| mtndawg |
 Sep 21 2014, 04:39 PM
Post
#1
|
|
Member  Group: Members Posts: 414 Joined: 26-January 09 From: Granite Bay, Ca Member No.: 9,985 Region Association: None 
 |
I recently acquired a car that was originally a 2L and have been told the engine size has been changed to 2.1, which I have not checked yet? The engine currently has webers. Can I use stock d-jet FI if it is 2.1?
|
   |
 
|
  |
Replies
| barefoot |
Sep 22 2014, 05:48 PM
Post
#2
|
|
Senior Member Group: Members Posts: 1,276 Joined: 19-March 13 From: Charleston SC Member No.: 15,673 Region Association: South East States
|
If you're after a cheap option to try, you can increase the fuel pressure to the injectors by adjusting the pressure regulator. Probably best to install a pressure gage in there to what you're doing. Remember that flow rate is proportional to the square root of pressure to your injectors, thus is you want 10% more flow you need to increase pressure by 1.1 squared, or 21%.
Since you're only increasing displacement by 5%, in theory you'll only need 10.25% pressure increase. Not sure just how much a stock pump is capable of putting out however, no experience there. |
|
|
|
Posts in this topic
mtndawg Stock injectors on a 2.1L? Sep 21 2014, 04:39 PM
Mark Henry If it has a carb cam ...then it's no. Sep 21 2014, 04:41 PM
worn
If it has a carb cam ...then it's no.
:agre... Sep 21 2014, 06:54 PM Dtjaden What you can do is use most of the stock d-jet com... Sep 21 2014, 06:19 PM aircooledtechguy
What you can do is use most of the stock d-jet co... Sep 23 2014, 09:16 AM Mblizzard The newer FJ67 injectors that are sold as replacem... Sep 22 2014, 04:51 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 22nd May 2024 - 10:06 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.