 2.7 Six conversion questions, Oil cooler and motronic |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| bigkensteele |
 Feb 26 2015, 10:19 PM
Post
#1
|
|
Major Member  Group: Members Posts: 2,197 Joined: 30-August 04 From: Cincinnati, OH Member No.: 2,660 Region Association: South East States 
 |
Topic 1: Has anyone ever tried mounting an oil cooler under a GT lid just above the fan, and if so does it keep the temp low enough for DE events?
Topic 2: Has anyone here ever adapted motronic from a 3.2 to work on a 2.7? If so, what is involved? Which distributor? What cam? Stock low compression CIS pistons or JEs? Topic 3: What kind of power can I get if I keep the CIS but am willing to port the heads, change cams and go to JE pistons? Please feel free to address any or all of the above? I have a '74 2.7 core that is currently torn apart and ready to send out for machining. It already has case-savers and nikasil jugs, so I am going to stay at 2.7. I have all of the CIS parts, so that is an option for induction, but I would rather do something else (other than carbs). I will also be running stock 6 heat exchangers and a 911 muffler. I just can't bear the thought of rebuilding this thing and only ending up with 150 hp, so any tips would be most appreciated. |
   |
 
|
Posts in this topic
bigkensteele 2.7 Six conversion questions Feb 26 2015, 10:19 PM
GeorgeRud My 2.7 has RS pistons, S cams, and Webers with an ... Feb 26 2015, 10:26 PM
wndsrfr
My 2.7 has RS pistons, S cams, and Webers with an... Feb 28 2015, 08:48 PM campbellcj In terms of the oil cooler, if you really don... Feb 27 2015, 12:00 AM bigkensteele
In terms of the oil cooler, if you really don... Feb 27 2015, 12:17 PM mepstein I would talk to one of the really good engine buil... Feb 27 2015, 06:21 AM Mark Henry Topic #1 link
http://www.914world.com/bbs2/index.... Feb 27 2015, 06:24 AM bigkensteele
Topic #1 link
http://www.914world.com/bbs2/index... Feb 27 2015, 12:15 PM JmuRiz Re: Motronic, I don't think I've heard of ... Feb 27 2015, 11:36 AM Steve A 2.7 runs a lot hotter than an aluminum 3.0 or 3.... Feb 27 2015, 01:46 PM bigkensteele
A 2.7 runs a lot hotter than an aluminum 3.0 or 3... Feb 27 2015, 10:40 PM gereed75
:agree:
Not an experienced expert in 911's... Feb 27 2015, 11:18 PM Steve
A 2.7 runs a lot hotter than an aluminum 3.0 or ... Feb 28 2015, 01:21 AM GeorgeRud When new, the 2.7 liter cars had oil coolers in Eu... Feb 28 2015, 02:49 PM Steve I loved my 2.7 in my 914. You can run a stock 2.0... Feb 28 2015, 04:44 PM bigkensteele
I loved my 2.7 in my 914. You can run a stock 2.... Feb 28 2015, 05:43 PM Steve
I loved my 2.7 in my 914. You can run a stock 2... Feb 28 2015, 06:24 PM bigkensteele
If you don't own it already, check out Bruce ... Feb 28 2015, 06:31 PM SirAndy does it keep the temp low enough for DE events?
He... Feb 28 2015, 06:38 PM bigkensteele
Here are your two choices:
- Install a front mou... Feb 28 2015, 07:04 PM mepstein
Here are your two choices:
- Install a front mo... Feb 28 2015, 07:07 PM bigkensteele
914 fenders do not get pass through air like a 91... Feb 28 2015, 07:42 PM Mark Henry Some one did this and said it worked well, but it... Feb 28 2015, 08:20 PM SLITS
Some one did this and said it worked well, but it... Mar 1 2015, 10:28 AM JmuRiz Most cam with CIS pistons is an SC grind or maybe ... Feb 28 2015, 09:17 PM bigkensteele I have a set of the Crane GE60 equivalents, but Br... Feb 28 2015, 11:16 PM gereed75
While I am in there, I will probably do the oil... Mar 1 2015, 11:59 AM Van914 Ken,
You can run a front cooler without changing t... Mar 1 2015, 09:15 AM Steve I plan on doing the same thing with my chrome bump... Mar 1 2015, 09:22 AM campbellcj I cut a notch out of an LE spoiler as well. I use... Mar 1 2015, 11:41 AM GeorgeRud Ollie's should be a great choice. Since mine ... Mar 1 2015, 04:40 PM JmuRiz FYI when pricing out a 2.45 for my brother, Henry... Mar 1 2015, 06:51 PM bigkensteele Thanks to all for the responses. I was looking fo... Mar 2 2015, 06:57 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st May 2024 - 10:32 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.