 First start after rebuild, No oil pressure... Someone help me..please! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| DavidSweden |
 Apr 18 2015, 04:33 AM
Post
#1
|
|
Member  Group: Members Posts: 479 Joined: 8-June 14 From: Sweden Member No.: 17,452 Region Association: Scandinavia  |
Engine 2.0 76
Rebuilt engine and should start it today. Pulled the plugs and filled oil. Cranked engine to get oil pressure but nothing. Pulled pressure switch and tested with compressed air works fine. Loosened oil filter and cranked again oil ran from filter, tightened filter and tried again.... Nothing. Oil type 20W 50 Need some advice on what to check to find source or problem.... It's just a Pita |
   |
 
|
Posts in this topic
DavidSweden First start after rebuild Apr 18 2015, 04:33 AM
toolguy You could pull a valve cover and see if oil has go... Apr 18 2015, 12:22 PM
DavidSweden
You could pull a valve cover and see if oil has g... Apr 18 2015, 12:29 PM Dave_Darling Did you pre-fill the filter with oil? If so, you ... Apr 18 2015, 12:44 PM DavidSweden
Did you pre-fill the filter with oil? If so, you... Apr 18 2015, 01:00 PM McMark It seems to take forever for a fresh T4 to get oil... Apr 18 2015, 12:57 PM DavidSweden
It seems to take forever for a fresh T4 to get oi... Apr 18 2015, 01:07 PM McMark It's a possibility. If you pull the big piston... Apr 18 2015, 02:08 PM DavidSweden
It's a possibility. If you pull the big pisto... Apr 18 2015, 03:12 PM McMark yeah, good point. :( Apr 18 2015, 03:19 PM Highland Just my 2 cents, but I couldn't build oil pres... Apr 18 2015, 04:56 PM DavidSweden
Just my 2 cents, but I couldn't build oil pre... Apr 19 2015, 01:34 AM rick 918-S I would fire it for a second. Then Pull the coil w... Apr 19 2015, 03:03 PM DavidSweden
I would fire it for a second. Then Pull the coil ... Apr 19 2015, 04:12 PM Jake Raby Fire up and shut down 5 times in succession. Let i... Apr 19 2015, 05:15 PM Al Meredith I build 2 engines a year and start them on an engi... Apr 19 2015, 05:56 PM Geezer914 Why is it recommended NOT to fill the oil filter w... Apr 20 2015, 08:38 AM stugray
Why is it recommended NOT to fill the oil filter ... Apr 20 2015, 09:54 AM DavidSweden Thanks to everyone for helping me out I appreciate... Apr 20 2015, 10:51 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th May 2024 - 11:12 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.