oil cooler adapter?, can you put one on the oil filter space |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
oil cooler adapter?, can you put one on the oil filter space |
bernbomb914 |
Jun 5 2003, 10:26 AM
Post
#1
|
one of the oldest Farts on this board Group: Benefactors Posts: 1,873 Joined: 29-December 02 From: Temecula, CA Member No.: 36 |
I would like to put a oil cooler on my car. Is there any way to mount the lines off the oil filter so I dont have to remove the engine? I want to retain the factory cooler and add another cooler under the engine cover. I have a engine lid that has 32 small louvers stamped in it to allow more air to come thru to help the heat build up. This is not a race car but the oil temp needs to come doen when I drive for several hours.
Bernie (IMG:style_emoticons/default/driving.gif) |
campbellcj |
Jun 5 2003, 10:30 AM
Post
#2
|
I can't Re Member Group: Members Posts: 4,543 Joined: 26-December 02 From: Agoura, CA Member No.: 21 Region Association: Southern California |
Yeah; what you need is called a "sandwich plate". It goes between the filter and the filter console thingie, and provides AN fittings for the cooler oil lines.
Attached image(s) |
bernbomb914 |
Jun 5 2003, 10:44 AM
Post
#3
|
one of the oldest Farts on this board Group: Benefactors Posts: 1,873 Joined: 29-December 02 From: Temecula, CA Member No.: 36 |
|
ChrisReale |
Jun 5 2003, 01:16 PM
Post
#4
|
Sleazy Group: Members Posts: 2,665 Joined: 20-January 03 From: San Francisco Member No.: 176 |
Do those things work well? If yo put san external oil cooler in the front, how much more oil do you need circulating around, assuming the oil cooler is "standard size": for a 914-4. Not really sure how oil coolers are sized....
|
ChrisReale |
Jun 5 2003, 01:19 PM
Post
#5
|
Sleazy Group: Members Posts: 2,665 Joined: 20-January 03 From: San Francisco Member No.: 176 |
Bernie, what are your oil temps?
|
campbellcj |
Jun 5 2003, 01:26 PM
Post
#6
|
I can't Re Member Group: Members Posts: 4,543 Joined: 26-December 02 From: Agoura, CA Member No.: 21 Region Association: Southern California |
Oil coolers come in various sizes and flavors.
For a car that is track-driven at all, you are well advised to put it up front. Most reports (including my previous car) say that the under-trunk or under-engine-lid locations just don't work well at all. You might see a 20-30F reduction but that isn't enough for hardcore use. I suppose a fan/duct lashup might help a little extra. Without an external cooler, my -4 cars would shoot to 250-300F in less than 15 minutes of track driving. That is NOT good... |
Lawrence |
Jun 5 2003, 03:52 PM
Post
#7
|
Senior Member Group: Benefactors Posts: 1,661 Joined: 5-February 03 Member No.: 244 Region Association: None |
Bernie,
I added one on the Bumblebee, mounted on the bottom of the rear trunk. Unfortunately, I don't have pictures handy. In the hot summer in Iowa, the cooler definately made a difference. The fan was veru good, but provided more help running around town. It provided less benefit on long stretches on the highway. I didn't use HUGE lines, but I had some made at NAPA pretty inexpensively, from high pressure hydraulic hose with custom fittings. I'm very happy with it, and it was a budget job that came out looking good. -Rusty |
bernbomb914 |
Jun 5 2003, 04:36 PM
Post
#8
|
one of the oldest Farts on this board Group: Benefactors Posts: 1,873 Joined: 29-December 02 From: Temecula, CA Member No.: 36 |
my temp goes to the 3/4 mark on the guage if I could lower it to the middle I would be happy. The engine is tired and I am trying to keep it alive untill I can rebuild the 2.0L that I have. the new engine will hold the oil pressure better and probley run cooler than this worn out eng.
Bernie (IMG:style_emoticons/default/driving.gif) |
campbellcj |
Jun 5 2003, 11:25 PM
Post
#9
|
I can't Re Member Group: Members Posts: 4,543 Joined: 26-December 02 From: Agoura, CA Member No.: 21 Region Association: Southern California |
Another point is that it is a very GOOD idea to get a new temp gauge & sender. The little VDO "Cockpit" series ones sold by HPH, Pelican etc. are pretty decent.
The 30 year old number-less stock center console gauges really leave you wondering. The ones I had on my cars moved enough where I could tell they were working, but who knows WTF actual temperature that was supposed to correspond to??? (IMG:style_emoticons/default/huh.gif) The only problem is that once you get a numbered temp gauge, you'll freak out the first few times you see how hot the -4 engines get in hard/summer driving (IMG:style_emoticons/default/driving.gif) I figure that's why the factory didn't include numbers in the first place (IMG:style_emoticons/default/confused24.gif) |
ninefourteener |
Jun 6 2003, 08:16 AM
Post
#10
|
Perfectly Normal Guy :) Group: Members Posts: 1,216 Joined: 3-June 03 From: St. Louis, MO Member No.: 779 |
There's one up under the engine cover in my car. It's not terribly noticeable unless you're looking down at the car.
It stays cool ALL the time though. I drove it straight from Chicago to Saint Louis (5 hours), and it was over 80 degrees the whole time. No problems at all (IMG:style_emoticons/default/ohmy.gif)) Attached image(s) |
Lo-Fi Version | Time is now: 4th May 2024 - 03:38 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |