 Not much clearance up front with flares? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Kerrys914 |
 Jun 14 2003, 07:48 PM
Post
#1
|
|
Dear, the parts I just sold paid for that part ;)  Group: Members Posts: 1,568 Joined: 26-December 02 From: Williamsburg, VA Member No.: 16  |
Okay guys...
I have installed glass flares last winter. I now have a set of dials on my '74 and have clearance issues with the front of the tire and TWO areas.. The first is the tire and the front edge of the flare.. I have very little clearence and it changes as the wheel turns (lock to lock) The second is the tire hits the front inside wheel well at full turn???? I have the same problem on both sides and the flares look okay, alignment wise (until the wheels were installed)?? Any Ideas? Will caster affect this? Cheers Kerry |
   |
 
|
Posts in this topic
Kerrys914 Not much clearance up front with flares? Jun 14 2003, 07:48 PM
Qarl I assume they are standard width GT type flares.
... Jun 14 2003, 08:10 PM Kerrys914 I have 15x7 dials with the 23.? offset and a 1" sp... Jun 14 2003, 08:27 PM J P Stein 225 X 60 X 15?.....humm, that's a 24.6 dia tir... Jun 15 2003, 12:35 AM Qarl Size Circumference Diameter
165/60/15 73.617 ... Jun 15 2003, 08:34 AM J P Stein Karl is right about the tire dia. That's whut ... Jun 15 2003, 09:54 AM anthony 165-60 is stock? I thought stock was 165R15 which ... Jun 15 2003, 10:12 AM Kerrys914 That SUCKS :headbang:
I just bought 4 new tires ... Jun 15 2003, 11:40 AM campbellcj The stock 165SR15 tire was super tall. Somewhere b... Jun 15 2003, 12:31 PM Qarl The stock tire may have been taller than that... I... Jun 15 2003, 01:56 PM Aaron Cox i thought when the aspect ratio was not stated, it... Jun 15 2003, 02:00 PM
J P Stein I gots my calcumulator out this time....now I... Jun 15 2003, 04:19 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 7th May 2024 - 07:14 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.