Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> TPS testing question?, Car is bucking under load
Jon H.
post May 25 2016, 10:26 AM
Post #1


Member
**

Group: Members
Posts: 237
Joined: 1-July 11
From: Ottawa, Canada
Member No.: 13,264
Region Association: Canada



Hello, I had my 73 2.0l out for its maiden voyage this year and the car was running great. On the way home I stopped at a light and when I took off the car was bucking horribly. I investigated and found the bolt under the plenum that grounds the wires for the TPS and, I think, the injectors had come out. I re-installed it checked the grounds, checked continuity between the ecu and the TPS and all is good. I checked the continuity of the TPS as the throttle is opened and closed and it appears that there are about three position that are open circuit. They are small gaps though, barely having to move the throttle to get continuity again. It this normal? Should there be 'flat' spots as I move the throttle or should there be 100% continuity all the time? I did remove the TPS and have a look and it looks fine. Could an arcing ground have caused the TPS to fail?

Thanks in advance!

Jon h.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic
Jon H.   TPS testing question?   May 25 2016, 10:26 AM
BeatNavy   "Greater FI minds" than me will have mor...   May 25 2016, 10:54 AM
rmital   ...check the connection from the harness to the CH...   May 25 2016, 10:57 AM
Jon H.   ...check the connection from the harness to the C...   May 25 2016, 11:09 AM
rmital   ...check the connection from the harness to the ...   May 25 2016, 11:40 AM
Jon H.   I checked the TPS using pins 9 and 12 on the ecu a...   May 25 2016, 11:02 AM
BeatNavy   Ok, so 17 is the idle pin and you should get conti...   May 25 2016, 11:12 AM
Jon H.   Ok, so 17 is the idle pin and you should get cont...   May 25 2016, 11:17 AM
r_towle   Dirty advance plates   May 25 2016, 11:43 AM
BeatNavy   Dirty advance plates I should have seen that com...   May 25 2016, 11:47 AM
r_towle   Weirdest behavior can be traced back to those pesk...   May 25 2016, 11:52 AM
BeatNavy   Weirdest behavior can be traced back to those pes...   May 25 2016, 12:48 PM
jor   If the FI is checking out, and the bucking is only...   May 25 2016, 12:28 PM
rmital   If the FI is checking out, and the bucking is onl...   May 25 2016, 12:33 PM
Jon H.   If the FI is checking out, and the bucking is onl...   May 25 2016, 03:04 PM
Jon H.   I just checked for the TPS clicks again and now i ...   May 25 2016, 03:13 PM
r_towle   I just checked for the TPS clicks again and now i...   May 25 2016, 06:04 PM
BeatNavy   I just checked mine in the garage (D-Jet, 2.0): 2...   May 25 2016, 04:51 PM
Jon H.   Well, after double checking the wiring harness I d...   May 25 2016, 06:46 PM
PancakePorsche   Wish I had a dollar for every time I have heard of...   May 26 2016, 02:59 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 19th May 2024 - 11:06 PM