 What's this demonic noise? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Amphicar770 |
 May 29 2016, 09:14 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,191 Joined: 20-April 10 From: PA, USA Member No.: 11,639 Region Association: MidAtlantic Region 
 |
I posted this in my build thread but since that has gotten kind of long, wanted to also call it out as a seperate topic.
I'm really starting to think I should not be allowed within 59 ft of a wrench. Went to set timing. No visible marks in fan so I chock one wheel and turn the other with a stick in cylinder # 1 to get to TDC. Confirm that flywheel Mark is at top, I can feel it by reaching around. I mark the fan with whiteout, put spark plug back in and start car. Forgot it is still in 5th but it's on stands so it just kicks out the wheel chock. But wait, now there is some kind of a whine / squeal type sound. Hard to pinpoint but I think it's from engine compartment. Thinking it is the AC belt I first tighten then remove entirely. No use. You can hear what I am talking about here. http://www.youtube.com/watch?v=tS0hHENOWPw Feeling like every step forward results in two steps back. |
   |
 
|
Posts in this topic
Amphicar770 What's this demonic noise? May 29 2016, 09:14 AM
stugray Its a long shot, but I have had a similar noise on... May 29 2016, 10:44 AM
BeatNavy
Unrelated question: why is the idle so high?
I b... May 29 2016, 11:16 AM Amphicar770
Unrelated question: why is the idle so high?
I ... May 29 2016, 08:31 PM r_towle Geez...
Did you drop something down the hold and i... May 29 2016, 10:45 AM PanelBilly Sounds like starter motor May 29 2016, 12:23 PM stugray If it is the starter it will burn up fairly quickl... May 29 2016, 01:53 PM Amphicar770 Yes, trying to diagnose fast idle which is why I w... May 29 2016, 04:07 PM SirAndy Starter is a new gear reduction unit.
Some of them... May 29 2016, 04:21 PM Java2570 I just installed my 2056 build and had a problem w... May 29 2016, 04:33 PM wndsnd Alternator bearing? May 29 2016, 05:07 PM Amphicar770 The starter did come with a shim that I installed.... May 29 2016, 05:55 PM ndfrigi maybe something grinding inside the clutch? May 29 2016, 06:28 PM OU812 Have you tried a Engine stethoscope? I have had pr... May 29 2016, 06:49 PM Amphicar770 Ok, so I looked all around and starts her up with ... May 29 2016, 08:24 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 20th May 2024 - 01:20 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.