 l-jet gurus need input, l-jet lean running |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| ablose58 |
 Apr 14 2005, 11:55 PM
Post
#1
|
|
rust never sleeps  Group: Members Posts: 584 Joined: 6-December 03 From: port orchard,wa. Member No.: 1,422  |
Thanks in advance for the advice, I have a 74 1.8 l-jet and I just replaced vac hoses intake boots and gaskets/fuel inj seals etc. I also installed an air/fuel mix gauge and the gauge indicates that I am running quite lean also my cyl head temp seems a little high too,around 350f so what's the best way to richen my overall mixture so head temps and air /fuel mix is closer to 14.7 or stoich if you will ? thanks again AL (IMG:http://www.914world.com/bbs2/html/emoticons/pray.gif)
|
   |
 
|
Posts in this topic
ablose58 l-jet gurus need input Apr 14 2005, 11:55 PM
lapuwali Where are you running lean? Idle? Midrange? Top... Apr 15 2005, 12:15 AM ablose58 I am running a nordskog gauge with a matching 02 s... Apr 15 2005, 12:21 AM ablose58 Oh the o2 sensor is mounted in a monza exh.where a... Apr 15 2005, 12:23 AM Reiche Al, If you're lean all the time, I would make ... Apr 15 2005, 12:27 AM ablose58 I've changed out all new vac lines intake boot... Apr 15 2005, 12:36 AM sean_v8_914 bypass the aux air valve and test again. how did y... Apr 15 2005, 12:40 AM Reiche Yes, that could do it. It should close within a fe... Apr 15 2005, 12:43 AM ablose58 New hoses were very snug to put on , I suppose I c... Apr 15 2005, 12:47 AM rhodyguy interesting as al's car runs very well and doe... Apr 15 2005, 05:50 AM scott thacher actually a sticking aar will not cause a lean cond... Apr 15 2005, 05:51 AM rhodyguy al's car is a bit slower to idle down when war... Apr 15 2005, 06:19 AM lapuwali That a/f meter sounds like a narrowband unit, thou... Apr 15 2005, 09:03 AM rhodyguy i know al is sleeping. i have an aar valve for him... Apr 15 2005, 09:38 AM lapuwali ... Apr 15 2005, 10:00 AM rhodyguy i'm not so sure al does the cold start up as t... Apr 15 2005, 10:09 AM
Marty Yeoman Try adding a 300 to 500 Ohm resister between the h... Apr 15 2005, 10:10 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 02:30 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.