 How to install factory front stablizer bar mounts, Quick and easy method I use |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 914Sixer |
 Oct 22 2016, 08:22 PM
Post
#1
|
|
914 Guru  Group: Members Posts: 8,870 Joined: 17-January 05 From: San Angelo Texas Member No.: 3,457 Region Association: Southwest Region 
 |
Clean the indention area off first. Take the mounting plate and turn it upside down. Place it in the ridge with any side up. You can FEEL it slot into the arch. Draw your center hole. Center punch hard. Take the smaller step bit (Harbor Freight) and step it through all the sizes. Next chuck up the larger bit and take it step by step until the center hole of the plate fits. Next draw the bottom hole only. Use the smaller step bit about half way or you will drill into the inside brace. Chuck the larger bit up and step the hole to about 19mm (3/4"). Fit plate again and mark two upper hole. Using the smaller bit again step it to 3/4" ONE hole at a time. Check the plate fit. You may have to open the holes ONE size larger on the step bit. Last picture is of the tank side.. Clean up holes and get ready to to welding preparation. Hope this will help you in your job. (IMG:style_emoticons/default/biggrin.gif)
Attached image(s)        
|
   |
 
|
Posts in this topic
914Sixer How to install factory front stablizer bar mounts Oct 22 2016, 08:22 PM
bigkensteele Interesting. Did you get these mounts at the deal... Oct 22 2016, 08:42 PM 914Sixer Yep, they are available from dealer for less than ... Oct 22 2016, 08:45 PM 914_teener I did that very similarly except instead of buying... Oct 22 2016, 09:42 PM echocanyons As I recently found out, It is also important to b... Oct 22 2016, 10:01 PM
914_teener
As I recently found out, It is also important to ... Oct 23 2016, 11:22 AM tygaboy Part # 914 501 162 10
Reinforcement for stabilser ... Oct 23 2016, 07:33 AM BeemerSteve I've been scratching my head thinking about ho... Oct 23 2016, 11:29 AM toolguy IIRC, the factory reinforcing plate was welded on ... Oct 23 2016, 12:02 PM 914_teener
IIRC, the factory reinforcing plate was welded on... Oct 23 2016, 02:04 PM 914Sixer Somebody please post a picture of the factory one.... Oct 23 2016, 02:14 PM maf914
Somebody please post a picture of the factory one... Sep 4 2017, 10:13 AM rdauenhauer
IIRC, the factory reinforcing plate was welded on... Oct 23 2016, 03:22 PM Mikey914
IIRC, the factory reinforcing plate was welded o... Sep 3 2017, 02:57 PM Wyvern Great info here . Thanks for posting.
I will be do... Sep 3 2017, 12:58 PM ConeDodger BTW, for those of you without sway bars, this is o... Sep 3 2017, 03:07 PM plays with cars :agree:
A must do enhancement to really experienc... Sep 4 2017, 08:49 AM mepstein This is on my '74 parts car. All factory as fa... Sep 4 2017, 09:57 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th April 2024 - 05:36 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.