Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Blinkers... Flashers, just stopped working
malcolm2
post May 15 2017, 04:11 PM
Post #1


Advanced Member
****

Group: Members
Posts: 2,729
Joined: 31-May 11
From: Nashville
Member No.: 13,139
Region Association: South East States



I noticed it at lunch today. The blinker indicator in the dash would flash 4 or 5 times, then stop.

Coming home I tried the e-flashers. Same deal. Maybe 7 flashes then OUT. Try the left side, 2 flashes, right side 4 flashes.... then OUT.

Now I get no flashes at all. Got a few honey do things to knockout this afternoon then I will start poking around.

Figured I'd start with the fuse, then relay. Seeing how it is the flasher and the blinker, I will rule out the lever and such in the column. How do you test a relay anyway?

Chime in with some thoughts.

Thanks,
Clark
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
Spoke
post May 16 2017, 12:23 PM
Post #2


Jerry
*****

Group: Members
Posts: 6,964
Joined: 29-October 04
From: Allentown, PA
Member No.: 3,031
Region Association: None



Yes, with one bulb load the relay should flash.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
malcolm2
post May 16 2017, 01:02 PM
Post #3


Advanced Member
****

Group: Members
Posts: 2,729
Joined: 31-May 11
From: Nashville
Member No.: 13,139
Region Association: South East States



QUOTE(Spoke @ May 16 2017, 01:23 PM) *

Yes, with one bulb load the relay should flash.



Good News, Bad News, I guess...

the relay worked on the bench. Using 49a I got a bulb to flash and of course the relay clicked.

I know you said not to worry about the C terminal, but for giggles, I put the bulb connection on the C term and nothing happened.

is that expected? Or maybe half of my relay is bad? (IMG:style_emoticons/default/blink.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic
malcolm2   Blinkers... Flashers   May 15 2017, 04:11 PM
malcolm2   I have checked the fuse....all is well. I pulled ...   May 16 2017, 07:32 AM
malcolm2   So here is my attempt at testing this baby. Seem ...   May 16 2017, 07:38 AM
Valy   Check the voltage feeding the relay in the car. I ...   May 16 2017, 07:50 AM
malcolm2   Check the voltage feeding the relay in the car. I...   May 16 2017, 09:15 AM
Spoke   Below is the simplified schematic for the turnsign...   May 16 2017, 09:31 AM
malcolm2   Below is the simplified schematic for the turnsig...   May 16 2017, 09:37 AM
Spoke   Below is the simplified schematic for the turnsi...   May 16 2017, 09:42 AM
malcolm2   1) and 2) only apply power to the relay. 3) appl...   May 16 2017, 09:58 AM
Spoke   Yes, with one bulb load the relay should flash.   May 16 2017, 12:23 PM
malcolm2   Yes, with one bulb load the relay should flash. ...   May 16 2017, 01:02 PM
Spoke   Yes, with one bulb load the relay should flash. ...   May 17 2017, 05:27 AM
914_teener   There was a great write up on the flasher relay it...   May 16 2017, 01:16 PM
malcolm2   I wish I could find it as my 73 had a similar pr...   May 16 2017, 01:49 PM
timothy_nd28   7 flashes is plenty, just limit yourself to right ...   May 16 2017, 01:35 PM
malcolm2   7 flashes is plenty, just limit yourself to right...   May 16 2017, 01:47 PM
malcolm2   OK... The bench test results are above. I just in...   May 16 2017, 04:37 PM
Spoke   I release the brake and the clicking and flashing...   May 17 2017, 05:32 AM
malcolm2   [quote name='malcolm2' post='2486828' date='May 1...   May 19 2017, 08:10 AM
Spoke   [quote name='Spoke' post='2487006' date='May 17 2...   May 19 2017, 11:57 AM
malcolm2   delete FLOOD post.   May 16 2017, 04:38 PM
Valy   C will only flash if there is load (bulb connected...   May 16 2017, 07:54 PM
malcolm2   C will only flash if there is load (bulb connecte...   May 16 2017, 08:48 PM
Valy   C will only flash if there is load (bulb connect...   May 17 2017, 12:11 AM
914_teener   Found the thread: http://www.914world.com/bbs2/in...   May 16 2017, 08:55 PM
falcor75   I have a similar but still different problem. I i...   May 16 2017, 11:04 PM
Spoke   I have a similar but still different problem. I ...   May 17 2017, 08:29 AM
LowBridge   This post is way to long... simple answer as we ha...   May 19 2017, 08:39 AM
malcolm2   Great.... I think we were both right, just referri...   May 19 2017, 12:22 PM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 29th March 2024 - 07:01 AM