Trim for main targa seal |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Trim for main targa seal |
vin man |
May 18 2017, 07:26 PM
Post
#1
|
Member Group: Members Posts: 178 Joined: 19-February 10 From: Gilbert, Arizona USA Member No.: 11,380 Region Association: Southwest Region |
I purchased a new Main Targa Seal from 914 Rubber. Looks very nice. However, when I went to install it, I did not see a place for it to grab along the pillars of the windshield on both sides.
I had assumed that the seal would fit onto the seam shown in the pics but it does not have a groove in the seal to do so. Wondering if there are supposed to be some trim pieces on the left and right windshield pillar and the seal would grab those? (IMG:http://www.914world.com/bbs2/uploads_offsite/i304.photobucket.com-11380-1495157196.1.jpg)(IMG:http://www.914world.com/bbs2/uploads_offsite/i304.photobucket.com-11380-1495157196.2.jpg)(IMG:http://www.914world.com/bbs2/uploads_offsite/i304.photobucket.com-11380-1495157196.3.jpg)(IMG:http://www.914world.com/bbs2/uploads_offsite/i304.photobucket.com-11380-1495157197.4.jpg) |
poorsche914 |
May 18 2017, 07:37 PM
Post
#2
|
T4 Supercharged Group: Members Posts: 3,087 Joined: 28-May 09 From: Smoky Mountains Member No.: 10,419 Region Association: South East States |
You are correct... there should be a trim strip that attaches to the A-pillar that the seal mounts to.
Maybe someone will have a picture they can post. (IMG:style_emoticons/default/driving.gif) |
vin man |
May 18 2017, 08:15 PM
Post
#3
|
Member Group: Members Posts: 178 Joined: 19-February 10 From: Gilbert, Arizona USA Member No.: 11,380 Region Association: Southwest Region |
Thanks. Are they available aftermarket? If so what are they called? Otherwise who has some for sale?
|
PlantMan |
May 18 2017, 09:18 PM
Post
#4
|
Member Group: Members Posts: 435 Joined: 14-May 14 From: Mission Viejo Member No.: 17,352 Region Association: Southern California |
|
PlantMan |
May 18 2017, 09:20 PM
Post
#5
|
Member Group: Members Posts: 435 Joined: 14-May 14 From: Mission Viejo Member No.: 17,352 Region Association: Southern California |
|
vin man |
May 18 2017, 09:35 PM
Post
#6
|
Member Group: Members Posts: 178 Joined: 19-February 10 From: Gilbert, Arizona USA Member No.: 11,380 Region Association: Southwest Region |
Thanks. I'll look for some to purchase.
If I'm reading my PET right, since I have a 71, looks like I need: 914 531 824 10 for the right and 914 531 824 11 for the left |
vin man |
May 18 2017, 09:48 PM
Post
#7
|
Member Group: Members Posts: 178 Joined: 19-February 10 From: Gilbert, Arizona USA Member No.: 11,380 Region Association: Southwest Region |
Thanks. I'll look for some to purchase. If I'm reading my PET right, since I have a 71, looks like I need: 914 531 824 10 for the right and 914 531 824 11 for the left Looks like there is a mistake in the PET. It shows different part numbers for -73 and 74- But sometimes the same part number. When I look at AA, they show same part number for all years. |
Andyrew |
May 18 2017, 09:56 PM
Post
#8
|
Spooling.... Please wait Group: Members Posts: 13,376 Joined: 20-January 03 From: Riverbank, Ca Member No.: 172 Region Association: Northern California |
Best bet is someone parting a car. Check the classifieds and post a WTB add.
|
PanelBilly |
May 18 2017, 09:59 PM
Post
#9
|
914 Guru Group: Members Posts: 5,788 Joined: 23-July 06 From: Kent, Wa Member No.: 6,488 Region Association: Pacific Northwest |
I'm sure Bruce Stone can fix you up
|
vin man |
May 18 2017, 10:01 PM
Post
#10
|
Member Group: Members Posts: 178 Joined: 19-February 10 From: Gilbert, Arizona USA Member No.: 11,380 Region Association: Southwest Region |
|
Bartlett 914 |
May 19 2017, 11:33 AM
Post
#11
|
Advanced Member Group: Members Posts: 2,213 Joined: 30-August 05 From: South Elgin IL Member No.: 4,707 Region Association: Upper MidWest |
Nice looking dash cluster
I purchased a new Main Targa Seal from 914 Rubber. Looks very nice. However, when I went to install it, I did not see a place for it to grab along the pillars of the windshield on both sides. I had assumed that the seal would fit onto the seam shown in the pics but it does not have a groove in the seal to do so. Wondering if there are supposed to be some trim pieces on the left and right windshield pillar and the seal would grab those? (IMG:http://www.914world.com/bbs2/uploads_offsite/i304.photobucket.com-11380-1495157196.1.jpg)(IMG:http://www.914world.com/bbs2/uploads_offsite/i304.photobucket.com-11380-1495157196.2.jpg)(IMG:http://www.914world.com/bbs2/uploads_offsite/i304.photobucket.com-11380-1495157196.3.jpg)(IMG:http://www.914world.com/bbs2/uploads_offsite/i304.photobucket.com-11380-1495157197.4.jpg) |
vin man |
May 19 2017, 11:39 AM
Post
#12
|
Member Group: Members Posts: 178 Joined: 19-February 10 From: Gilbert, Arizona USA Member No.: 11,380 Region Association: Southwest Region |
Nice looking dash cluster 197.4.jpg[/img][/url] Thanks! (IMG:http://www.914world.com/bbs2/uploads_offsite/i304.photobucket.com-11380-1489088334.1.jpg) |
7TPorsh |
May 19 2017, 12:05 PM
Post
#13
|
7T Porsh Group: Members Posts: 2,691 Joined: 27-March 06 From: Glendale Ca Member No.: 5,782 Region Association: Southern California |
Send a PM to bdstone
|
Lo-Fi Version | Time is now: 28th March 2024 - 05:47 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |