 Oil temp wire |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| tomh |
 Jun 15 2017, 08:31 AM
Post
#1
|
|
Member  Group: Members Posts: 322 Joined: 28-February 10 From: san jose Member No.: 11,412 Region Association: None  |
Could someone explain the exact path of the wire from the engine to the oil temp gauge.
A complete stock 74 2.0 with center counsel. Thanks all |
   |
 
|
| JeffBowlsby |
Jun 15 2017, 08:42 AM
Post
#2
|
|
914 Wiring Harnesses & Beekeeper Group: Members Posts: 8,964 Joined: 7-January 03 From: San Ramon CA Member No.: 104 Region Association: None 
|
Its a single green/black stripe wire. For a 74 it runs between the sender and the box connector under the battery tray coming out of the chassis harness. The wire in the chassis harness goes to the oil temp gauge connection in the center console.
The wire is attached to the motor at three points by sheet metal brackets which are crimped onto the wire. 1. The first connector is attached to the sender cover plate. From here the wire routes above the motor mounts. 2. The second connector attaches to the lower mount bolt for the oil filter console. 3. The third connector attaches to the lower oil cooler to fan housing bolt. |
|
|
|
| tomh |
Jun 15 2017, 11:06 AM
Post
#3
|
|
Member Group: Members Posts: 322 Joined: 28-February 10 From: san jose Member No.: 11,412 Region Association: None |
Great, I appreciate the detailed info.
|
|
|
|
| LowBridge |
Jun 15 2017, 12:28 PM
Post
#4
|
|
Member Group: Members Posts: 370 Joined: 10-August 15 From: Lunenburg, MA Member No.: 19,045 Region Association: North East States |
QUOTE(Jeff Bowlsby @ Jun 15 2017, 10:42 AM)  Its a single green/black stripe wire. For a 74 it runs between the sender and the box connector under the battery tray coming out of the chassis harness. The wire in the chassis harness goes to the oil temp gauge connection in the center console. The wire is attached to the motor at three points by sheet metal brackets which are crimped onto the wire. 1. The first connector is attached to the sender cover plate. From here the wire routes above the motor mounts. 2. The second connector attaches to the lower mount bolt for the oil filter console. 3. The third connector attaches to the lower oil cooler to fan housing bolt. (IMG:style_emoticons/default/blink.gif) .. you need to get out more (IMG:style_emoticons/default/av-943.gif) |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd July 2025 - 04:44 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.