Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> clutch problems - SOLVED, grabby and notchy
mzalanka
post Jul 1 2017, 11:44 AM
Post #1


Member
**

Group: Members
Posts: 116
Joined: 11-July 11
From: Portland, OR
Member No.: 13,300
Region Association: None



I'm reposting my question from yesterday, which was poorly received. In hindsight I should have just asked the question and skipped the degree of detail and lame attempts at humor. Wish delete was an option.

Two clutch-related problems: clutch pedal feel that gets "notchy" or, for lack of a better term, "not smooth" as the engine warms, and also judder or grabbing from take-off in first (also gets worse as engine warms).

I do not know my way around a clutch or a transmission. The one installed was put in by the engine rebuilder and sat for 5 years.

Vehicle has new pressure plate, friction disk, TOB, Gemo cable, rebuilt pedal cluster. Just fixed an input shaft leak, drove about 100 miles on it. Seems like that could explain the grabbing but not the worsening notchiness, which is still present even when engine is off, warm, and has been present since Mile 0.

I've ordered a clutch kit from PP and will probably just replace the whole thing, but what specifically should I be looking for in terms of faults?

Thanks. Long time lurker but rare poster. Greatly appreciate the World.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
TravisNeff
post Jul 1 2017, 07:05 PM
Post #2


914 Guru
*****

Group: Members
Posts: 5,082
Joined: 20-March 03
From: Mesa, AZ
Member No.: 447
Region Association: Southwest Region



You may still have a leak on the input shaft Or did you recently fix the leak - after the new clutch? If the clutch disk is saturated with oil it will need to be replaced. I highly doubt you will need to replace your pressure plate. Post pics when you get the existing one out.

That's too bad about your first post getting dumped on.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mzalanka
post Jul 2 2017, 07:35 AM
Post #3


Member
**

Group: Members
Posts: 116
Joined: 11-July 11
From: Portland, OR
Member No.: 13,300
Region Association: None



Travis - I think that's at least part of the problem. I only drove about 100 miles with the leak but it was pretty sizable. Doesn't seem like enough time to cause a problem (I fixed it as soon as I could just because of this worry), but I bet I do have oil on the friction plate.

Will post pics when able. Appreciate it.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic
mzalanka   clutch problems - SOLVED   Jul 1 2017, 11:44 AM
Dave_Darling   Who rebuilt the pedal cluster? Any idea what kind...   Jul 1 2017, 06:52 PM
mzalanka   [quote name='Dave_Darling' date='Jul 1...   Jul 2 2017, 07:33 AM
Travis Neff   You may still have a leak on the input shaft Or d...   Jul 1 2017, 07:05 PM
mzalanka   Travis - I think that's at least part of the p...   Jul 2 2017, 07:35 AM
Elliot Cannon   I understand "grabby", not so much ...   Jul 2 2017, 10:25 AM
The Cabinetmaker   I'm another on the notchy thing. No idea what ...   Jul 2 2017, 10:40 AM
Racer Chris   ... Shudder should say it all. ... I believe th...   Jul 20 2017, 02:02 PM
The Cabinetmaker   One more thing, sounds like a clutch out of adjust...   Jul 2 2017, 10:45 AM
mzalanka   When I press the clutch pedal cold, it's like ...   Jul 2 2017, 11:15 AM
mzalanka   Had a helper push on the clutch pedal and realized...   Jul 2 2017, 03:05 PM
bdstone914   Had a helper push on the clutch pedal and realize...   Jul 2 2017, 03:13 PM
euro911   Forrest had a similar problem a few weeks ago. The...   Jul 2 2017, 03:45 PM
Dr Evil   Was your flywheel resurfaced? That will set your d...   Jul 13 2017, 12:58 PM
euro911   Was your flywheel resurfaced? That will set your d...   Jul 13 2017, 02:02 PM
Dr Evil   Was your flywheel resurfaced? That will set your ...   Jul 13 2017, 02:54 PM
mzalanka   Found two problems when I dropped the trans. 1) ...   Jul 20 2017, 08:31 AM
mzalanka   Moral of the story is that even seemingly small tr...   Jul 20 2017, 08:33 AM
Dr Evil   Dude, if you need parts like that in the future, l...   Jul 20 2017, 09:11 AM
mzalanka   Dude, if you need parts like that in the future, ...   Jul 20 2017, 11:56 AM
euro911   :thumbsup:   Jul 20 2017, 01:39 PM


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 17th May 2024 - 11:50 AM