 How did you route your CHT or AFR wiring |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Morrie |
 Sep 18 2017, 11:22 AM
Post
#1
|
|
Member  Group: Members Posts: 181 Joined: 8-October 07 From: Cedar Park, Texas Member No.: 8,198 Region Association: Southwest Region 
 |
I am ready to route wiring from the engine bay to the cockpit for my AFR meter. I am curious about where folks have routed wires / drilled holes, etc. I know I want to stay away from ignition components based on experience, and it looks like the current wire harness access point is pretty much stuffed. The connector is for an Innovate MTX-L and the connector to feed through to the cockpit is probably 1/2 an inch long, so it is more than fishing a couple wires.....
Appreciate any experience based advice. The exhaust bung is welded in place so this is next on the agenda so I can start working on tuning the D-Jet setup. Kind regards, |
   |
 
|
Posts in this topic
Morrie How did you route your CHT or AFR wiring Sep 18 2017, 11:22 AM
Dave_Darling I used a coat hanger wire to thread more wires thr... Sep 18 2017, 11:28 AM
Morrie
I used a coat hanger wire to thread more wires th... Sep 18 2017, 09:24 PM michael7810 I ran mine thru the tunnel. Dual CHT, Innovate AF... Sep 18 2017, 12:51 PM Morrie
I ran mine thru the tunnel. Dual CHT, Innovate A... Sep 18 2017, 09:22 PM michael7810
I ran mine thru the tunnel. Dual CHT, Innovate ... Sep 18 2017, 09:59 PM Olympic 914 I drilled a hole next to the release for the engin... Sep 19 2017, 09:06 AM Morrie
I drilled a hole next to the release for the engi... Sep 19 2017, 10:53 AM BeatNavy
I drilled a hole next to the release for the eng... Sep 19 2017, 11:00 AM michael7810
I drilled a hole next to the release for the eng... Sep 19 2017, 11:51 AM Morrie
[quote name='Morrie' post='2529285' date='Sep 19 ... Sep 19 2017, 01:18 PM michael7810
I have the dual CHT, AFR, and oil temp/pressure... Sep 19 2017, 10:52 AM Mark Henry There's a couple of places to drill/cut a hole... Sep 19 2017, 11:41 AM db9146 I installed an Innovate O2 sensor and ran the cabl... Sep 19 2017, 01:51 PM Morrie
I installed an Innovate O2 sensor and ran the cab... Sep 19 2017, 03:21 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd May 2024 - 08:59 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.