Inverted 915 Project, No Description needed |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Inverted 915 Project, No Description needed |
pcar916 |
Sep 18 2017, 06:06 PM
Post
#1
|
Is that a Lola? Group: Members Posts: 1,523 Joined: 2-June 05 From: Little Rock, AR Member No.: 4,188 Region Association: None |
Hi Folks,
I'm returned after a brief hiatus with a question. Some of you remember I have Penelope, a 914/993 machine. I have decided to replace the 914 transaxle with an inverted 915. How many of you have done it and do you have stories? :-) My thinking is as follows... 1. Billet side plate. I've already paid the price several times for deflection. The 993 is not a huge hp machine, maybe 270hp with a bit less torque depending on the RPM/throttle. 2. Cable shifter (any suggestions that don't include making one myself.) It would be fun but might take longer than I want to wait. 3. Already have the turbo flanges/CV's to accommodate the deflection angle. 4. Oil cooler already installed whether I need it or not. Already addressed in the trans cooler thread from years ago. Thought seriously about building a side shifter 915 with Bott's kit, but as good as it is, and it is. I don't want to take the gear-stack out every time I want to check the LSD plates/R&P. I've gotten a replacement 993 engine while I jazz up her (tired) original engine, but since I haven't done one of these builds, I figured I'd ask this crowd about it because I'd rather drive her while I build the engine. Glad to be back! Ron |
Cracker |
Sep 18 2017, 06:29 PM
Post
#2
|
Advanced Member Group: Members Posts: 2,148 Joined: 2-February 10 From: Atlanta (area) Member No.: 11,316 Region Association: South East States |
No matter what you do with a 915...it is still a 915 (same goes for the 930)! I would suggest you consider purchasing a unit that adapts a G86-20 (Boxster S 6-speed) to your motor. Clay was showing us parts of this kit over dinner Saturday evening. You would get the close-ratio box with immense strength - plenty of aftermarket shifters to chose from too! Just my 2 cents...
Tony |
Lo-Fi Version | Time is now: 17th May 2024 - 06:18 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |