 Diagram for heater tubes?, For a ‘73 2.0 |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| arne |
 Sep 20 2017, 07:40 PM
Post
#1
|
|
Serial Rescuer of old vehicles...  Group: Members Posts: 738 Joined: 31-January 17 From: Eugene, Oregon Member No.: 20,799 Region Association: None  |
So I removed all the heater tubes and elbows from the heat exchangers months ago when I dropped the engine for oil leak remediation. Had them stripp d and such at the shop that dipped the two deck lids. Now I need to put it all back together, and it looks like a big, raw steel jigsaw puzzle. Does anyone have a diagram or guide as to how it all goes together?
 |
   |
 
|
  |
Replies
| DRPHIL914 |
Sep 21 2017, 12:06 PM
Post
#2
|
|
Dr. Phil Group: Members Posts: 5,766 Joined: 9-December 09 From: Bluffton, SC Member No.: 11,106 Region Association: South East States 
|
this is the piece on drivers side considered a warm air guide- i just put this jn , but it was a bit tight and had some rubbing on the shift bar- it shouldnt but if it does then you will need to make a bit of a modification- but easily removed - there is a similar one for the other side too- btw that will look nice with all your new clean bits installed! please take some pictures after you are finished!
Attached thumbnail(s) 
|
|
|
|
Posts in this topic
arne Diagram for heater tubes? Sep 20 2017, 07:40 PM
Perry Kiehl It's actually very self explanatory once you s... Sep 20 2017, 09:21 PM Jeff Bowlsby RTFWSM. Nice diagrams there. Sep 20 2017, 10:23 PM arne I guess I’ll need to look through the factory ma... Sep 20 2017, 10:45 PM troth I found PET to be helpful.
This is a big PDF, you... Sep 20 2017, 11:33 PM ndfrigi RE: Diagram for heater tubes? Sep 21 2017, 12:56 AM rhodyguy Get new grommets/seals for the j-tube tin holes an... Sep 21 2017, 07:05 AM arne These diagrams and pictures will help immensely. T... Sep 21 2017, 08:32 AM
Dave_Darling
this is the piece on drivers side considered a wa... Sep 21 2017, 06:40 PM arne How hot do these pieces get? Do I need BBQ or engi... Sep 21 2017, 12:10 PM Philip W. this was powder coated black so no worries there -... Sep 21 2017, 12:47 PM Philip W. yep, sorry i posted the wrong picture Dave, thanks... Sep 21 2017, 09:06 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 16th May 2024 - 07:31 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.