Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Engine Options, Build 2.3 or pursue other options
Mblizzard
post Dec 15 2017, 05:27 PM
Post #1


Advanced Member
****

Group: Members
Posts: 3,033
Joined: 28-January 13
From: Knoxville Tn
Member No.: 15,438
Region Association: South East States



I currently have a 2056 with a great top half. Big valve heads, Micro Squirt, and 96mm P/Cs. But I want more HP. I have set myself a $4K budget for building the bottom half, potentially going to 2.3 with a stroker crank, adding cam, balancing, and making some valve train improvements. But I started thinking, you know how dangerous that is, are there any other engine options in the $4K range that would provide reasonable HP increase. Not looking for 250 HP but just enough to keep it interesting.

Anyone got thoughts or suggestions? Open to most options but not sure that converting to water cooled is even remotely possible with the budget limit. Engine swap for proven HP increase seems the easiest option but thought I would see what the brain trust could come up with.

User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
thelogo
post Dec 15 2017, 09:24 PM
Post #2


Senior Member
***

Group: Retired Members
Posts: 1,510
Joined: 6-April 10
Member No.: 11,572
Region Association: None



I always thought you would drive your 2056
Until it needed a rebuild then go bigger

Not tear apart a healthy running engine for no reason

But as my mechanic told me when i told him to
Pry out the 1.7 and drop in the 2366

If you want to have fun then you should have fun (IMG:style_emoticons/default/sheeplove.gif)



Edit :

A 2.3 is not very subtle
ALL it wants to do is go really fast

Where as your 2056 , you can still drive like cruiser

And if you want to pump water honda s2000
Motor with rad as the gt oil cooler cutout ???
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mark Henry
post Dec 16 2017, 09:15 AM
Post #3


that's what I do!
***************

Group: Members
Posts: 20,065
Joined: 27-December 02
From: Port Hope, Ontario
Member No.: 26
Region Association: Canada



QUOTE(thelogo @ Dec 15 2017, 10:24 PM) *


A 2.3 is not very subtle
ALL it wants to do is go really fast

Where as your 2056 , you can still drive like cruiser



Wrong, sure if you over cam it and drive it like a 17yr/old, but the long stroke T4 with a sensible cam drives quite nice.
My 2.6 goes like stink if I'm heavy on the go pedal, but it's totally tame for normal driving.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
thelogo
post Dec 16 2017, 09:35 AM
Post #4


Senior Member
***

Group: Retired Members
Posts: 1,510
Joined: 6-April 10
Member No.: 11,572
Region Association: None



[quote name='Mark Henry' date='Dec 16 2017, 07:15 AM' post='2558247']
[quote name='thelogo' post='2558164' date='Dec 15 2017, 10:24 PM']

A 2.3 is not very subtle
ALL it wants to do is go really fast

Where as your 2056 , you can still drive like cruiser

[/quote]

Wrong, sure if you over cam it









I have no idea what it means but
The guy who had the motor built and sold it to me says

Its got the. (C25 / C35 ) grind cam ?


And yes the car will go tame for normal driving, but its always ready to go war emergency power at the snap of a finger
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic
Mblizzard   Engine Options   Dec 15 2017, 05:27 PM
Racer   a 2056 is roughly 120hp? A nice 2.3 would be 150...   Dec 15 2017, 06:44 PM
Mark Henry   Since you have already done all the hard work for ...   Dec 15 2017, 06:53 PM
thelogo   I always thought you would drive your 2056 Until ...   Dec 15 2017, 09:24 PM
Mark Henry   A 2.3 is not very subtle ALL it wants to do ...   Dec 16 2017, 09:15 AM
thelogo   [quote name='thelogo' post='2558164...   Dec 16 2017, 09:35 AM
Mblizzard   Should be sorted in the handling suspension part. ...   Dec 16 2017, 07:45 AM
Mark Henry   The Scat C-25 and C-35 are carb cam designs from t...   Dec 16 2017, 10:01 AM
whitetwinturbo   ..................here's a bit more horsepower...   Dec 20 2017, 09:09 PM
Mblizzard   ..................here's a bit more horsepowe...   Dec 21 2017, 08:13 AM
wndsrfr   I had a failed DPR crank on my 2316....cracked whe...   Dec 21 2017, 07:51 AM
Mblizzard   I had a failed DPR crank on my 2316....cracked wh...   Dec 21 2017, 08:16 AM
Perry Kiehl   I'd start putting together parts for a 6 conve...   Dec 21 2017, 08:29 AM
mepstein   :agree: It can make a lot of sense to build a sec...   Dec 21 2017, 09:59 AM
Robnxious   :agree: It can make a lot of sense to build a se...   Dec 21 2017, 10:11 AM
Mblizzard   :agree: It can make a lot of sense to build a s...   Dec 21 2017, 10:47 AM
DaveO90s4   I have a full marching numbers 1956 356A. I think ...   Dec 21 2017, 02:54 PM
Robnxious   I have a full marching numbers 1956 356A. I think...   Dec 21 2017, 05:43 PM
Mblizzard   I have a full marching numbers 1956 356A. I think...   Dec 21 2017, 05:54 PM
JOEPROPER   I would slowly gather parts for a 6 conversion and...   Dec 21 2017, 03:33 PM
Mblizzard   I would slowly gather parts for a 6 conversion an...   Dec 21 2017, 04:56 PM
rhodyguy   What is the plan for cylinders?   Dec 21 2017, 04:01 PM
Mblizzard   What is the plan for cylinders? Right now I am ...   Dec 21 2017, 05:00 PM
Mark Henry   What is the plan for cylinders? Right now I am...   Dec 21 2017, 07:55 PM
Mblizzard   [quote name='Mblizzard' post='2559961' date='Dec ...   Dec 21 2017, 08:05 PM
DaveO90s4   If you're in the US these Corvair engines are ...   Dec 21 2017, 06:25 PM
BeatNavy   If you're in the US these Corvair engines are...   Dec 21 2017, 08:11 PM
Mark Henry   I've built a bunch of nickies engines, /4, /6 ...   Dec 21 2017, 08:12 PM
Mblizzard   I've built a bunch of nickies engines, /4, /6...   Dec 21 2017, 08:40 PM
Montreal914   As Mark mentioned, if you stay in the budget range...   Dec 21 2017, 08:37 PM
Mblizzard   OK so after much work and with the help of a numbe...   Jan 11 2018, 01:18 PM
mb911   OK so after much work and with the help of a numb...   Jan 11 2018, 06:17 PM
matthepcat   The 2.6 liter turbo motor from this car is availab...   Jan 12 2018, 04:07 PM
Mblizzard   The 2.6 liter turbo motor from this car is availa...   Jan 12 2018, 04:41 PM
Mblizzard   Something evil is coming! Crap I have a lot...   Jan 16 2018, 06:25 PM
JamesM   Something evil is coming! Crap I have a lo...   Jan 16 2018, 06:57 PM
Mblizzard   Something evil is coming! Crap I have a l...   Jan 16 2018, 07:21 PM
Mueller   Fan is in the wrong location, should be on top and...   Jan 16 2018, 07:05 PM


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 28th March 2024 - 01:59 PM