 Best initial cleaning approach for transmission |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Tdskip |
 Jan 18 2018, 07:35 AM
Post
#1
|
|
Advanced Member  Group: Members Posts: 3,686 Joined: 1-December 17 From: soCal Member No.: 21,666 Region Association: None 
 |
Good morning. The 901 on my project has already been removed from the car. I need to open it up to replace the 2nd gear synchro and it obviously needs to be clear clean clean before I do that.
Is it safe to pressure wash the exterior case so long as I don’t spray where the input shaft is? And been there / cleaned that tips to share? Thanks! |
   |
 
|
Posts in this topic
Tdskip Best initial cleaning approach for transmission Jan 18 2018, 07:35 AM
Front yard mechanic Oven cleaner Jan 18 2018, 08:02 AM sdoolin If you are careful around the seals, and tape the ... Jan 18 2018, 08:04 AM
Justinp71
If you are careful around the seals, and tape the... Jan 18 2018, 10:23 AM 914Sixer Start out with a small putty knife and clean all t... Jan 18 2018, 08:21 AM rhodyguy :agree: + brake cleaner and a piece of 6mil plasti... Jan 18 2018, 08:28 AM cuddyk First drain all the gear oil. I got a wood movers ... Jan 18 2018, 09:06 AM Tomgayer
First drain all the gear oil. I got a wood movers... Jan 18 2018, 09:26 AM Bartlett 914
First drain all the gear oil. I got a wood movers... Jan 18 2018, 10:26 AM Bartlett 914 I use mineral spirits or naphtha and a small tray.... Jan 18 2018, 09:08 AM Tdskip Thanks for the discussion. Jan 18 2018, 09:20 AM cuddyk good catch. I used cleaner. F'in auto correct... Jan 18 2018, 09:45 AM mepstein Steam pressure washer. 5 minutes and done. Jan 18 2018, 09:54 AM Perry Kiehl Steam cleaner. 210* hot water melts a lot of gun... Jan 18 2018, 09:57 AM Dr Evil Pressure washing is a mixed bag. I have seen corro... Jan 18 2018, 10:01 AM 914 7T3 Pressure wash, remove internals and then media bla... Jan 18 2018, 10:52 AM 914 RZ-1 I used this stuff:
https://www.lowes.com/pd/Crown... Jan 18 2018, 10:55 AM Vacca Rabite Don't do what I did and soak it in a big metal... Jan 18 2018, 11:13 AM NeunEinVier Never tried oven cleaner, but Gunk Engine Cleaner ... Jan 18 2018, 12:47 PM Mblizzard While your choice of clearer/solvent is up to the ... Jan 18 2018, 02:37 PM mepstein
While your choice of clearer/solvent is up to the... Jan 18 2018, 02:51 PM NeunEinVier I set my trans in front of just a standard electri... Jan 19 2018, 06:40 PM 914forme If you want it to darken a bit quicker.
Eagle One... Jan 19 2018, 05:55 PM Tdskip Thanks, good discussion Jan 19 2018, 06:28 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 12:34 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.