Something Evil This Way Comes, I Hope |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Something Evil This Way Comes, I Hope |
Mblizzard |
Jan 29 2018, 07:34 PM
Post
#1
|
Advanced Member Group: Members Posts: 3,033 Joined: 28-January 13 From: Knoxville Tn Member No.: 15,438 Region Association: South East States |
Well after spending lots of $$$ and seeing lots of work coming up, I hope to finally have my car to a respectable point. Should have a decent 2.3 with TBI and Microsquirt. Koni adjustable on all 4 corners. Front and rear anti sway bars. Rear coil overs and 180lb springs. New rotors, wheel bearings front and rear. All new bushings. Adjustable drop links on the front. DIY Autotune hotspark ignition. And lots of 914 rubber goodies.
This is going to be a lot of work! Will try to document it as it progresses. |
wndsrfr |
Jan 29 2018, 08:15 PM
Post
#2
|
Senior Member Group: Members Posts: 1,428 Joined: 30-April 09 From: Rescue, Virginia Member No.: 10,318 Region Association: MidAtlantic Region |
You're going to love that 2.3....here's mine at Summit Point, turn up the volume!
https://www.youtube.com/watch?v=jbss0WamRIQ |
Montreal914 |
Jan 29 2018, 08:41 PM
Post
#3
|
Senior Member Group: Members Posts: 1,541 Joined: 8-August 10 From: Claremont, CA Member No.: 12,023 Region Association: Southern California |
|
Mblizzard |
Jan 29 2018, 08:50 PM
Post
#4
|
Advanced Member Group: Members Posts: 3,033 Joined: 28-January 13 From: Knoxville Tn Member No.: 15,438 Region Association: South East States |
You're going to love that 2.3....here's mine at Summit Point, turn up the volume! https://www.youtube.com/watch?v=jbss0WamRIQ Awesome! Hope to do some track time soon. Slowly aquring the kit. |
RickS |
Jan 30 2018, 01:04 AM
Post
#5
|
Senior Member Group: Members Posts: 1,408 Joined: 17-April 06 From: 'False City', WA Member No.: 5,880 Region Association: None |
Will be watching with interest and looking forward to your world tour to inspect it up close.
|
Dr Evil |
Jan 30 2018, 09:24 AM
Post
#6
|
Send me your transmission! Group: Members Posts: 22,993 Joined: 21-November 03 From: Loveland, OH 45140 Member No.: 1,372 Region Association: MidAtlantic Region |
Ha! By your title, and the fact we know each other, I thought I forgot that I scheduled a trip to visit or something. (IMG:style_emoticons/default/smile.gif)
Cant wait to see your progress! Cool build. |
Mblizzard |
Jan 30 2018, 06:24 PM
Post
#7
|
Advanced Member Group: Members Posts: 3,033 Joined: 28-January 13 From: Knoxville Tn Member No.: 15,438 Region Association: South East States |
Ha! By your title, and the fact we know each other, I thought I forgot that I scheduled a trip to visit or something. (IMG:style_emoticons/default/smile.gif) Cant wait to see your progress! Cool build. Nope but I still owe you a shirt! |
Mblizzard |
Feb 4 2018, 03:36 PM
Post
#8
|
Advanced Member Group: Members Posts: 3,033 Joined: 28-January 13 From: Knoxville Tn Member No.: 15,438 Region Association: South East States |
Slow progress but got the engine cleaned up a bit. Gross decon done and ready for detailed cleaning.
Started cleaning and painting some other parts. |
Mblizzard |
Feb 8 2018, 07:26 PM
Post
#9
|
Advanced Member Group: Members Posts: 3,033 Joined: 28-January 13 From: Knoxville Tn Member No.: 15,438 Region Association: South East States |
Clean, paint, add eye candy repeat.
You learn that there are a lot of parts that can soak up time and money that most will never see. Oh well looks like some warm weather is coming and I will be able to do some bigger parts. Clean, paint,............ |
Rob-O |
Feb 8 2018, 09:51 PM
Post
#10
|
Senior Member Group: Members Posts: 1,251 Joined: 5-December 03 From: Mansfield, TX Member No.: 1,419 Region Association: Southwest Region |
You're going to love that 2.3....here's mine at Summit Point, turn up the volume! https://www.youtube.com/watch?v=jbss0WamRIQ I just KNEW that Camaro was going to go off course. Looked like he was pushing a little too hard. I was hoping your video was longer so I could see if he was still off course when you came around again. Didn’t look like he did any damage, but maybe just needed a few moments to gather himself. |
Mblizzard |
Feb 20 2018, 06:41 PM
Post
#11
|
Advanced Member Group: Members Posts: 3,033 Joined: 28-January 13 From: Knoxville Tn Member No.: 15,438 Region Association: South East States |
Plotting evil things takes time. Lots of parts have to come together before I can take over 914 World.
Got some 315 cc injectors courtesy of Five O Motorsports. CSP bell crank linkage brings me closer to world domination. With these Tarett axels the world will cower at my feet! Pay no attention to the kitty butt in the photo. All part of my evil plan. |
Mblizzard |
Feb 20 2018, 07:39 PM
Post
#12
|
Advanced Member Group: Members Posts: 3,033 Joined: 28-January 13 From: Knoxville Tn Member No.: 15,438 Region Association: South East States |
Overkill?
Sure but looks great! |
Mblizzard |
Feb 24 2018, 11:19 AM
Post
#13
|
Advanced Member Group: Members Posts: 3,033 Joined: 28-January 13 From: Knoxville Tn Member No.: 15,438 Region Association: South East States |
Got most of the cleaning done and started mocking up the new fuel system.
Long way to go before its drive time. |
Craigers17 |
Feb 24 2018, 11:36 AM
Post
#14
|
Senior Member Group: Members Posts: 728 Joined: 5-August 17 From: Rome, GA Member No.: 21,317 Region Association: South East States |
Looks great.....I know you said it's a 2.3, but can you give any build details, and/or who built it?
|
Mblizzard |
Feb 24 2018, 11:45 AM
Post
#15
|
Advanced Member Group: Members Posts: 3,033 Joined: 28-January 13 From: Knoxville Tn Member No.: 15,438 Region Association: South East States |
Looks great.....I know you said it's a 2.3, but can you give any build details, and/or who built it? I have some of the history of the engine but not the exact builds details. Jansen Enterprise in Belmont CA Did the build. But has mostly the standard mods swivel foot rockers, 78mm crank, cam, dual spring big valve heads, lightened flywheel, and balanced. |
DRPHIL914 |
Feb 24 2018, 05:20 PM
Post
#16
|
Dr. Phil Group: Members Posts: 5,758 Joined: 9-December 09 From: Bluffton, SC Member No.: 11,106 Region Association: South East States |
so by the looks of this you gave up on the 2056 with fi??
|
Mblizzard |
Feb 24 2018, 06:26 PM
Post
#17
|
Advanced Member Group: Members Posts: 3,033 Joined: 28-January 13 From: Knoxville Tn Member No.: 15,438 Region Association: South East States |
|
914-300Hemi |
Feb 24 2018, 10:09 PM
Post
#18
|
Senior Member Group: Members Posts: 1,355 Joined: 7-September 06 From: San Dimas, CA Member No.: 6,794 Region Association: Southern California |
Looks like it is going to be an amazing engine.
|
Mike Bellis |
Feb 24 2018, 11:54 PM
Post
#19
|
Resident Electrician Group: Members Posts: 8,345 Joined: 22-June 09 From: Midlothian TX Member No.: 10,496 Region Association: None |
I have some of the history of the engine but not the exact builds details. Jansen Enterprise in Belmont CA Did the build. But has mostly the standard mods swivel foot rockers, 78mm crank, cam, dual spring big valve heads, lightened flywheel, and balanced. I know that guy. He does decent work. That engine should be put together correctly. He works on my buddy's drag Ghia T1. |
DRPHIL914 |
Feb 25 2018, 07:30 AM
Post
#20
|
Dr. Phil Group: Members Posts: 5,758 Joined: 9-December 09 From: Bluffton, SC Member No.: 11,106 Region Association: South East States |
so by the looks of this you gave up on the 2056 with fi?? Nope!its stil there ready to run. This one is FI as well and should put up some respectable HP numbers. Keeping the 2056 as a back up. Might be able to keep up with you soon! well, maybe (IMG:style_emoticons/default/poke.gif) , but its about handling and driving skill more than HP! (IMG:style_emoticons/default/shades.gif) but seriously i am sure you will kick some but and find some ditches with that set up. you should come down to robeling road for a pca de day when you gwt it ready! i am doing the same clean up and refresh of tin and other stuff while my motor is out - i am not gettimg into soing anything with my heads or p&c's right now, just clean up and leaks- i looked closer at your pictures and see the f.i. bits - are you going with a Tangetine header and wxhaust on the new motor too? shod be awesome! there was a Raby built 2.3 with all of Foley's stuff on it last weekend here at our cars and coffee- sounded awesome! he shold be coming to the Okteenerfest in Sept! |
Lo-Fi Version | Time is now: 19th April 2024 - 04:18 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |