 Gas cap gasket, what to do. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| daytona |
 Feb 15 2018, 07:40 PM
Post
#1
|
|
daytona  Group: Members Posts: 435 Joined: 13-April 14 From: Ormond Beach, Florida Member No.: 17,249 Region Association: South East States  |
Hi all,
Having a problem with the gas cap on my 74. The gas cap is almost new and in really good shape. However, I must have gone through 3 or 4 gas cap gaskets in a couple of months. I have been using rubber gaskets that I sourced from a vendor here in the world. The rubber gasket appears to be the correct size, but after removing and reinstalling the gas cap a few times it bunches up and stretches and gets all messed up. A couple of times it ripped and once almost fell inside the gas tank while removing the gas cap. I think that the original gasket was made of cork material. Is the rubber gasket the problem? Should I make or by a cork gasket? or is the spring action inside the gas cap maybe too strong? Anybody else having this issue? Thanks, Bill. |
   |
 
|
Posts in this topic
daytona Gas cap gasket Feb 15 2018, 07:40 PM
Drums66 .....Did you talk to the Vendor?
:wavebye: Feb 15 2018, 07:47 PM daytona Rather not go there. Feb 15 2018, 08:04 PM Tom_T Bill,
The original gaskets as I recall were a sti... Feb 16 2018, 10:04 AM daytona Hi Tom T,
Thanks for the information. I was thinki... Feb 16 2018, 10:45 AM Retroracer Let us know what solution you come up with. I am ... Feb 16 2018, 11:20 AM mepstein Maybe a little lube on the gasket and fuel filler ... Feb 16 2018, 11:47 AM dr914@autoatlanta.com Mark's replacement gasket is a good one, but t... Feb 16 2018, 11:52 AM Chris914n6 The gasket attaches to a floating piece that shoul... Feb 16 2018, 01:45 PM dcheek I just hand cut one our of 1/16" thick Neopre... Feb 16 2018, 02:05 PM Mikey914 The factory caps make it very difficult to install... Feb 16 2018, 02:05 PM NeunEinVier Maybe this cork-rubber stuff could work? Says ... Feb 16 2018, 05:48 PM Mikey914 We stamp ours, and can make from any material. The... Feb 17 2018, 02:54 AM
gothspeed
We stamp ours, and can make from any material. Th... Feb 20 2018, 01:01 PM GeorgeRud I think the original gasket on my -6 was made of l... Feb 17 2018, 08:15 AM daytona Hi guys I have an update on the gas cap gasket pro... Feb 20 2018, 11:09 AM NeunEinVier Awesome did you use the 1/16" or 1/8" th... Feb 20 2018, 12:55 PM daytona Hi NeunEinVier,
I used the 1/16 material. I compar... Feb 20 2018, 01:12 PM Mikey914 We have sourced a slightly thicker gasket material... Feb 20 2018, 01:19 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th May 2024 - 08:55 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.