 Rear Trailing Arm Bushings question |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Bates |
 Mar 15 2018, 08:58 AM
Post
#1
|
|
Bates  Group: Members Posts: 68 Joined: 27-December 13 From: Madison, Virginia Member No.: 16,800 Region Association: MidAtlantic Region  |
I'm replacing the rear bushings and want to allow lubrication via grease fitting.
Do the inner diameter of the bushings pivot on the shaft or do the trailing arms pivot on the outer diameter of the bushings? Bushings seem tighter on the shaft, and that surface area is much smaller than the o.d. |
   |
 
|
Posts in this topic
Ecke Liebhaber Rear Trailing Arm Bushings question Mar 15 2018, 08:58 AM
malcolm2 I have seen bushings with zerk fittings, so the gr... Mar 15 2018, 09:15 AM Ecke Liebhaber After 20 searches I found the answer;
Bushings are... Mar 15 2018, 09:15 AM
malcolm2
Install the bushings, ream i.d. of bushing with ... Mar 15 2018, 09:18 AM
Eric_Shea
Install the bushings, ream i.d. of bushing with... Mar 15 2018, 12:58 PM malcolm2
Elephant requires all races be JB Welded in place... Mar 15 2018, 01:53 PM Eric_Shea
Elephant requires all races be JB Welded in plac... Mar 15 2018, 01:58 PM HalfMoon
After 20 searches I found the answer;
Bushings ar... Mar 15 2018, 09:31 AM Mikey914 The factory process I doubt was vulcanized. It wou... Mar 15 2018, 09:30 AM Ecke Liebhaber Bushing is supposed to rotate on the shaft.
Bushin... Mar 15 2018, 12:50 PM Ecke Liebhaber I agree with Eric. 1/4" of 'slop' is ... Mar 16 2018, 05:41 AM Eric_Shea RE: Rear Trailing Arm Bushings question Mar 16 2018, 09:27 AM Andyrew http://www.914world.com/bbs2/uploads/post-1110-152... Mar 16 2018, 09:43 AM  |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 29th April 2024 - 08:05 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.