Widebody LS6 rebuild., long time 914 world car desgned and built by B. massaged and refined by Paul, now entrusted to me to rebuild and repair the front end and make my own. |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Widebody LS6 rebuild., long time 914 world car desgned and built by B. massaged and refined by Paul, now entrusted to me to rebuild and repair the front end and make my own. |
dan10101 |
Jul 6 2018, 09:04 AM
Post
#21
|
TORQUE-o-holic Group: Members Posts: 1,140 Joined: 29-April 03 From: Eagle Point, Or Member No.: 626 Region Association: Pacific Northwest |
Chris, Thanks for.the picture. I might try my had drifting That day the car was way too loose, even for drifting. He did a full 360, smoking the tires while trying to get the car going in the right direction again, after a spin on-course. #fail (IMG:style_emoticons/default/biggrin.gif) I've been there before felt the smiles and the frowns (IMG:style_emoticons/default/sunglasses.gif) (IMG:style_emoticons/default/confused24.gif) |
dan10101 |
Jul 6 2018, 09:07 AM
Post
#22
|
TORQUE-o-holic Group: Members Posts: 1,140 Joined: 29-April 03 From: Eagle Point, Or Member No.: 626 Region Association: Pacific Northwest |
Sounds like the next Workshop Day should be at Dan's? (IMG:style_emoticons/default/shades.gif) Looking forward to watching. Let me know if there's anything I can do to help out. Build partyat my house! You bring all the tools I'll supply the mess. (IMG:style_emoticons/default/aktion035.gif) |
burton73 |
Jul 6 2018, 03:05 PM
Post
#23
|
burton73 Group: Members Posts: 3,508 Joined: 2-January 07 From: Los Angeles Member No.: 7,414 Region Association: Southern California |
What is your take on how to redo your car?
Transplant all the goodies in a new body or get a body shop to rework the body on this one? Or are you a guy with mad skill sets like we have seen here? Bob B (IMG:style_emoticons/default/sawzall-smiley.gif) (IMG:style_emoticons/default/welder.gif) (IMG:style_emoticons/default/idea.gif) (IMG:style_emoticons/default/popcorn[1].gif) |
DRPHIL914 |
Jul 6 2018, 08:02 PM
Post
#25
|
Dr. Phil Group: Members Posts: 5,759 Joined: 9-December 09 From: Bluffton, SC Member No.: 11,106 Region Association: South East States |
i think i saw this car at okteenerfest 4 years ago in Townsend TN, and he lost the clutch on the first day! (IMG:style_emoticons/default/headbang.gif)
really nice to see it reacquired by someone who can get her back on the road! good luck with the restoration/rehab. |
r_towle |
Jul 6 2018, 09:16 PM
Post
#26
|
Custom Member Group: Members Posts: 24,567 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States |
Are there pics from the front?
A thread I missed? Is Paul OK? I hope the magic gas can survived!!! |
Andyrew |
Jul 6 2018, 10:47 PM
Post
#27
|
Spooling.... Please wait Group: Members Posts: 13,376 Joined: 20-January 03 From: Riverbank, Ca Member No.: 172 Region Association: Northern California |
Are there pics from the front? A thread I missed? Is Paul OK? I hope the magic gas can survived!!! http://www.914world.com/bbs2/index.php?showtopic=327081 Here you go (IMG:style_emoticons/default/smile.gif) |
914-300Hemi |
Jul 6 2018, 11:12 PM
Post
#28
|
Senior Member Group: Members Posts: 1,356 Joined: 7-September 06 From: San Dimas, CA Member No.: 6,794 Region Association: Southern California |
Congrats on a great looking car. Looks like a fun project.
|
9144me2enjoy |
Jul 6 2018, 11:37 PM
Post
#29
|
Member Group: Members Posts: 310 Joined: 19-June 18 From: Oregon Member No.: 22,240 Region Association: Pacific Northwest |
Congratsulations on your purchase, I had just PM the previous owner about buying the engine, my loss I should of just bought the car! IF you loose interest in the rebuild let me know, I would love to take it off your hands! (IMG:style_emoticons/default/driving.gif)
|
dan10101 |
Jul 7 2018, 12:06 AM
Post
#30
|
TORQUE-o-holic Group: Members Posts: 1,140 Joined: 29-April 03 From: Eagle Point, Or Member No.: 626 Region Association: Pacific Northwest |
Congratsulations on your purchase, I had just PM the previous owner about buying the engine, my loss I should of just bought the car! IF you loose interest in the rebuild let me know, I would love to take it off your hands! (IMG:style_emoticons/default/driving.gif) Thanks for the offer. It's not likely that I would loose interest in my dream car. I've wanted one since Hot Rod Magazine did an article on Rod Simpsons red V8. Yes I'll have earn it, so to speak, but all the better to earn a piece of it. This will make it back on the road. You're pretty close to me relatively speaking. I'm in Eagle Point. |
ChrisFoley |
Jul 7 2018, 02:44 PM
Post
#33
|
I am Tangerine Racing Group: Members Posts: 7,910 Joined: 29-January 03 From: Bolton, CT Member No.: 209 Region Association: None |
I remember standing next to this car when it was on a chassis dyno up the street from my shop right after a camshaft change (to de-tune it slightly) and new crank/rod bearings.
I watched the 180mph speedo get buried with the left rear wheel no more than 2 feet from my right leg. |
dan10101 |
Jul 7 2018, 05:50 PM
Post
#34
|
TORQUE-o-holic Group: Members Posts: 1,140 Joined: 29-April 03 From: Eagle Point, Or Member No.: 626 Region Association: Pacific Northwest |
I remember standing next to this car when it was on a chassis dyno up the street from my shop right after a camshaft change (to de-tune it slightly) and new crank/rod bearings. I watched the 180mph speedo get buried with the left rear wheel no more than 2 feet from my right leg. That's crazy. Do you remember any numbers? I've been trying to figure out which cam is in it. It looks like a combination of 2 profiles. |
dan10101 |
Jul 7 2018, 06:50 PM
Post
#35
|
TORQUE-o-holic Group: Members Posts: 1,140 Joined: 29-April 03 From: Eagle Point, Or Member No.: 626 Region Association: Pacific Northwest |
Here's a teaser of the current condition. Yes Paul is ok. Probably a bit heartbroken I know I was when I did similar work to my BMW.
The 914 sustained front end damage. But fortunately the really important stuff is fine. Even the radiator looks ok. I'll post more when it's in my hands. Keep a look out for a red truck car carrier doing the cross country bit. Let me know if you see it! |
ChrisFoley |
Jul 8 2018, 12:53 PM
Post
#36
|
I am Tangerine Racing Group: Members Posts: 7,910 Joined: 29-January 03 From: Bolton, CT Member No.: 209 Region Association: None |
That's crazy. Do you remember any numbers? I've been trying to figure out which cam is in it. It looks like a combination of 2 profiles. I want to say 425 at the wheels but that's not a certain memory. I don't think I have the dyno graph in my records. The cam was ground for 1.8 ratio lifters IIRC, which were supplied with the camshaft. I don't remember the cam mfr & p/n but it was more conservative than the one Bill built the engine with. |
dan10101 |
Jul 8 2018, 07:11 PM
Post
#37
|
TORQUE-o-holic Group: Members Posts: 1,140 Joined: 29-April 03 From: Eagle Point, Or Member No.: 626 Region Association: Pacific Northwest |
That's crazy. Do you remember any numbers? I've been trying to figure out which cam is in it. It looks like a combination of 2 profiles. I want to say 425 at the wheels but that's not a certain memory. I don't think I have the dyno graph in my records. The cam was ground for 1.8 ratio lifters IIRC, which were supplied with the camshaft. I don't remember the cam mfr & p/n but it was more conservative than the one Bill built the engine with. That actually sounds pretty good. Thank |
whitetwinturbo |
Jul 9 2018, 08:16 PM
Post
#38
|
Honey, does this wing make my ass look fat? Group: Members Posts: 1,391 Joined: 22-October 11 From: Newport Beach/Kalefornya/USA Member No.: 13,704 Region Association: Southern California |
(IMG:style_emoticons/default/happy11.gif) (IMG:style_emoticons/default/happy11.gif) (IMG:style_emoticons/default/happy11.gif) ............ looks like it might by fast (IMG:style_emoticons/default/stirthepot.gif)
|
dan10101 |
Jul 9 2018, 10:57 PM
Post
#39
|
TORQUE-o-holic Group: Members Posts: 1,140 Joined: 29-April 03 From: Eagle Point, Or Member No.: 626 Region Association: Pacific Northwest |
(IMG:style_emoticons/default/happy11.gif) (IMG:style_emoticons/default/happy11.gif) (IMG:style_emoticons/default/happy11.gif) ............ looks like it might by fast (IMG:style_emoticons/default/stirthepot.gif) well, maybe. At least fast enough for me... (IMG:style_emoticons/default/driving.gif) |
9144me2enjoy |
Jul 10 2018, 06:44 AM
Post
#40
|
Member Group: Members Posts: 310 Joined: 19-June 18 From: Oregon Member No.: 22,240 Region Association: Pacific Northwest |
Congratsulations on your purchase, I had just PM the previous owner about buying the engine, my loss I should of just bought the car! IF you loose interest in the rebuild let me know, I would love to take it off your hands! (IMG:style_emoticons/default/driving.gif) Thanks for the offer. It's not likely that I would loose interest in my dream car. I've wanted one since Hot Rod Magazine did an article on Rod Simpsons red V8. Yes I'll have earn it, so to speak, but all the better to earn a piece of it. This will make it back on the road. You're pretty close to me relatively speaking. I'm in Eagle Point. Dan wishing you the best on the rebuild, its your dream now! Live it, treasure it, enjoy it! Beautiful car, hope to cross paths down the road. Roy |
Lo-Fi Version | Time is now: 28th April 2024 - 07:34 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |