Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

 
 Reply to this topicStart new topic
> More Info on Engine Blocks ?
Beakster
post Aug 13 2018, 09:53 PM
Post #1


Member
**

Group: Members
Posts: 121
Joined: 13-August 15
From: Calgary,AB Canada
Member No.: 19,055
Region Association: None
I have two 1.7 engine Blocks

the one in pieces Case n# is EA064290

The other in the car is EB005450

Would anyone have more info on engines by the Case numbers ??
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
jcd914
post Aug 13 2018, 10:15 PM
Post #2


Advanced Member
****

Group: Members
Posts: 2,081
Joined: 7-February 08
From: Sacramento, CA
Member No.: 8,684
Region Association: Northern California
EA and E B engine cases are the same.
The EA engine was the 72/73 Rest Of World 1.7L engine.
The EB engine was the 72/73 USA 1.7L engine with slightly low compression and HP.
It was the pistons that were different to lower the compression.

Jim
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
porschetub
post Aug 14 2018, 12:01 AM
Post #3


Advanced Member
****

Group: Members
Posts: 4,696
Joined: 25-July 15
From: New Zealand
Member No.: 18,995
Region Association: None
QUOTE(Beakster @ Aug 14 2018, 03:53 PM) *

I have two 1.7 engine Blocks

the one in pieces Case n# is EA064290

The other in the car is EB005450

Would anyone have more info on engines by the Case numbers ??

Jeez easy to find anywhere ,use google..I do it before asking any question on what ever forum I'am on which is many and all rather different types of cars.
The 1.7 "E'' cases are a great foundation for a build go 96mm with 2.0 litre heads you will be good,but you really need to change the cam if not going to FI.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
TheCabinetmaker
post Aug 14 2018, 06:46 AM
Post #4


I drive my car everyday
*****

Group: Members
Posts: 8,300
Joined: 8-May 03
From: Tulsa, Ok.
Member No.: 666
Why Google? That info is right under your finger. Top right corner of every page. It's called 914INFO.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mark Henry
post Aug 14 2018, 06:59 AM
Post #5


that's what I do!
***************

Group: Members
Posts: 20,065
Joined: 27-December 02
From: Port Hope, Ontario
Member No.: 26
Region Association: Canada
All Type four cases are basically the same with small differences.

-some very early 411 cases were mag and had no windage tray provisions, very rare.
-bus cases have different drilling for dipstick, oil fill, fuel pump (carb), lifter pressure relief (late cases not drilled),etc.
-similar differences as bus for 411/412 cases.
Biggest issue with using bus or 411/412 cases in a 914 is the dipstick tube.

For 914 the only difference in the 1.7,1.8, 2.0 cases is where the serial number is. I don't know for sure but the euro carbed 914 may have the fuel pump area machined for the mechanical pump.

QUOTE(porschetub @ Aug 14 2018, 02:01 AM) *


The 1.7 "E'' cases are a great foundation for a build go


1.7/1.8 are the often best cases for any build, the shorter stroke crank is stronger and has less flex than the longer 2.0 crank, therefore causing less wear to the case.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
bdstone914
post Aug 14 2018, 08:51 AM
Post #6


bdstone914
****

Group: Members
Posts: 4,508
Joined: 8-November 03
From: Riverside CA
Member No.: 1,319
QUOTE(Mark Henry @ Aug 14 2018, 05:59 AM) *

All Type four cases are basically the same with small differences.

-some very early 411 cases were mag and had no windage tray provisions, very rare.
-bus cases have different drilling for dipstick, oil fill, fuel pump (carb), lifter pressure relief (late cases not drilled),etc.

For 914 the only difference in the 1.7,1.8, 2.0 cases is where the serial number is. I don't know for sure but the euro carbed 914 may have the fuel pump area machined for the mechanical pump.

QUOTE(porschetub @ Aug 14 2018, 02:01 AM) *


The 1.7 "E'' cases are a great foundation for a build go


1.7/1.8 are the often best cases for any build, the shorter stroke crank is stronger and has less flex than the longer 2.0 crank, therefore causing less wear to the case.

(IMG:style_emoticons/default/agree.gif) I saw a VW 412, 1.8L case that had the mechanical fuel pump that mounts to the rear of the case.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
dr914@autoatlanta.com
post Aug 14 2018, 09:09 AM
Post #7


914 Guru
*****

Group: Members
Posts: 7,811
Joined: 3-January 07
From: atlanta georgia
Member No.: 7,418
Region Association: None
ea is a 73 1.7 Eb is for a 74 1.8


QUOTE(Beakster @ Aug 13 2018, 08:53 PM) *

I have two 1.7 engine Blocks

the one in pieces Case n# is EA064290

The other in the car is EB005450

Would anyone have more info on engines by the Case numbers ??
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mark Henry
post Aug 14 2018, 10:59 AM
Post #8


that's what I do!
***************

Group: Members
Posts: 20,065
Joined: 27-December 02
From: Port Hope, Ontario
Member No.: 26
Region Association: Canada
I edited my post above for 411/412 and "Biggest issue with using bus or 411/412 cases in a 914 is the dipstick tube."
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mark Henry
post Aug 14 2018, 11:02 AM
Post #9


that's what I do!
***************

Group: Members
Posts: 20,065
Joined: 27-December 02
From: Port Hope, Ontario
Member No.: 26
Region Association: Canada
QUOTE(bdstone914 @ Aug 14 2018, 10:51 AM) *

QUOTE(Mark Henry @ Aug 14 2018, 05:59 AM) *

All Type four cases are basically the same with small differences.

-some very early 411 cases were mag and had no windage tray provisions, very rare.
-bus cases have different drilling for dipstick, oil fill, fuel pump (carb), lifter pressure relief (late cases not drilled),etc.

For 914 the only difference in the 1.7,1.8, 2.0 cases is where the serial number is. I don't know for sure but the euro carbed 914 may have the fuel pump area machined for the mechanical pump.

QUOTE(porschetub @ Aug 14 2018, 02:01 AM) *


The 1.7 "E'' cases are a great foundation for a build go


1.7/1.8 are the often best cases for any build, the shorter stroke crank is stronger and has less flex than the longer 2.0 crank, therefore causing less wear to the case.

(IMG:style_emoticons/default/agree.gif) I saw a VW 412, 1.8L case that had the mechanical fuel pump that mounts to the rear of the case.

Sure it wasn't a bus case?
411/412 used an early D-jet FI system in north america.
Bus had carbs till 75 and the mechanical fuel pump.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Dave_Darling
post Aug 14 2018, 05:35 PM
Post #10


914 Idiot
**********

Group: Members
Posts: 14,980
Joined: 9-January 03
From: Silicon Valley / Kailua-Kona
Member No.: 121
Region Association: Northern California
QUOTE(dr914@autoatlanta.com @ Aug 14 2018, 08:09 AM) *

ea is a 73 1.7 Eb is for a 74 1.8


EC is the 1.8 case, both 74 and 75. EB is the low-compression CA-spec 73 1.7.

--DD
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 20th April 2024 - 12:43 AM
Invision Power Board v9.1.4 © 2024  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...