 problems problems problems, What to do? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| bernbomb914 |
 Jun 16 2005, 09:55 PM
Post
#1
|
|
one of the oldest Farts on this board  Group: Benefactors Posts: 1,873 Joined: 29-December 02 From: Temecula, CA Member No.: 36   |
I picked up a couple of new (to me) arms to install muellers front bearings, hubs and new volvo calipers.got everything installed went to put the torshon bars in and they dont fit. It seems the arms are 911 which makes for a big problem. the bearing races are locktighted on as per instructions and I dont know how easy they will come off. is there a easy remedy for this problem with out taking everything apart?
Bernie (IMG:http://www.914world.com/bbs2/html/emoticons/stromberg.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif) |
   |
 
|
Posts in this topic
bernbomb914 problems problems problems Jun 16 2005, 09:55 PM
jim912928 yep..get some 914 torsion bars! Should be ple... Jun 16 2005, 10:04 PM Mueller the easiest would be to find a set of stock 911 to... Jun 16 2005, 10:05 PM Aaron Cox bernie -
do you have 911 or 914 arms?
i have som... Jun 16 2005, 10:06 PM jim912928 sorry..didn't read your thread slow enough...i... Jun 16 2005, 10:37 PM SLITS Ok Bernie, I will look for eleben bars and end cap... Jun 16 2005, 10:55 PM bernbomb914 my 21mm 914 Tbars do not fit so I assume the a arm... Jun 16 2005, 10:56 PM jim912928 Easiest solution would be to get some 911 torsion ... Jun 16 2005, 11:07 PM
hmeeder Bernie;
The 914 t-bars have 29 splines and 911 ha... Jun 16 2005, 11:17 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th May 2024 - 06:23 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.