Roll Bar Aluminum Trim Install, Install Question |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Roll Bar Aluminum Trim Install, Install Question |
xperu |
Nov 1 2018, 11:21 AM
Post
#1
|
TEXAS Group: Members Posts: 597 Joined: 13-June 06 From: League City Texas Member No.: 6,213 Region Association: None |
When installing the 3 aluminum trim pieces on roll bar, are the 2 side trim pieces the only support for the top roll bare piece. The reason I’m asking is on my previous 914 I thought there was a clip in the center of the trim piece that fit in a hole in the bar to hold it in place. Thanks
|
mepstein |
Nov 1 2018, 01:27 PM
Post
#2
|
914-6 GT in waiting Group: Members Posts: 19,239 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region |
part # 914.559.223.10
About $10 each at the porsche dealer but you can probably find used. Maybe bdstone, Garold, ect @xperu Attached image(s) |
xperu |
Nov 8 2018, 02:26 PM
Post
#3
|
TEXAS Group: Members Posts: 597 Joined: 13-June 06 From: League City Texas Member No.: 6,213 Region Association: None |
part # 914.559.223.10 About $10 each at the porsche dealer but you can probably find used. Maybe bdstone, Garold, ect @xperu OK so now that I picked up the 3 clips, What is the best method to install. I looked at several threads, but no info. Like I said before it's been 10 years or so sense I removed the trim and really can't remember. I just do not want to screw things up. Thanks Mike |
mepstein |
Nov 8 2018, 02:49 PM
Post
#4
|
914-6 GT in waiting Group: Members Posts: 19,239 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region |
part # 914.559.223.10 About $10 each at the porsche dealer but you can probably find used. Maybe bdstone, Garold, ect @xperu OK so now that I picked up the 3 clips, What is the best method to install. I looked at several threads, but no info. Like I said before it's been 10 years or so sense I removed the trim and really can't remember. I just do not want to screw things up. Thanks Mike Clip goes on the trim then push trim onto targa bar. Push straight on, it doesn’t slide on from the side. |
xperu |
Nov 8 2018, 03:37 PM
Post
#5
|
TEXAS Group: Members Posts: 597 Joined: 13-June 06 From: League City Texas Member No.: 6,213 Region Association: None |
part # 914.559.223.10 About $10 each at the porsche dealer but you can probably find used. Maybe bdstone, Garold, ect @xperu OK so now that I picked up the 3 clips, What is the best method to install. I looked at several threads, but no info. Like I said before it's been 10 years or so sense I removed the trim and really can't remember. I just do not want to screw things up. Thanks Mike Clip goes on the trim then push trim onto targa bar. Push straight on, it doesn’t slide on from the side. Thanks Mark, ur always a big help. Thanks again. Mike |
Lo-Fi Version | Time is now: 25th April 2024 - 09:34 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |