 Install a 912E engine into the 914?, "Temporarily" |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| BK911 |
 Dec 20 2018, 10:54 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 672 Joined: 19-February 04 From: Rocky Top, TN Member No.: 1,674 Region Association: None  |
The 914 is up on the lift to do an oil change and adjust valves.
Fuch'n oil is everywhere! Not even sure where to start to chase down the leak. Have a 912E going through a minor restoration including tranny rebuild. The engine has been sitting on a stand for a couple of months already, and no idea when the car will be ready for it. Also have a 2056 in parts all ready for assembly. Long term plans were to build the 2056 for the 912E and put the 2.0 in the 914. If I stick to this plan, why not put the 2.0 in the 914 now? And not waste time on the valve adjustment? Or should I keep the original engine in the 912E and put the 2056 in the 914? If I ever sell the 912E, swapping motors back is no big deal. Progress has stalled until I decide. |
   |
 
|
Posts in this topic
BK911 Install a 912E engine into the 914? Dec 20 2018, 10:54 AM
BK911 Forgot to mention, both engines are running carbs. Dec 20 2018, 11:11 AM Krieger Clean up the oil on the the 914 while it's on ... Dec 20 2018, 11:16 AM IronHillRestorations I'd probably do as Krieger suggests, even if y... Dec 20 2018, 01:31 PM
VaccaRabite put the 2056 in the 914 for sure.
Zach Dec 20 2018, 06:20 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 06:28 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.