 Can I use a Carter’s inline pump AND a fuel return line?, Or do I need a three port pump? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tornik550 |
 Jan 19 2019, 03:48 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,248 Joined: 29-January 07 From: Ohio Member No.: 7,486 Region Association: None  |
I recently changed to PMO carbs. I have the PMO fuel pressure regulator which calls for the use of the fuel return line. I previously had used a Carter inline pump and did not have the return line hooked up.
I am installing new metal fuel lines from tangerine. I figure that if I am replacing lines, I might as well replace the return line also (even if I don’t use it). My question is- can I use the same carters inline pump and also use the fuel return line or do I have to get a fuel pump that has a return port? I have never used a fuel return line so I have a poor understanding of its function- I am not clear if any sort of pump pressure is needed to get the fuel to return? |
   |
 
|
Posts in this topic
tornik550 Can I use a Carter’s inline pump AND a fuel return line? Jan 19 2019, 03:48 PM
Mark Henry The return comes off of PMO regulator.
One in from... Jan 19 2019, 03:52 PM tornik550 So do I run the line directly from the pmo regulat... Jan 19 2019, 04:05 PM
mb911
So do I run the line directly from the pmo regula... Jan 19 2019, 04:07 PM Mark Henry Interested in a mount for the PMO regulator?
Need... Jan 19 2019, 07:50 PM Mark Henry My PMO mount. :) Jan 19 2019, 10:02 PM  |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 29th April 2024 - 11:30 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.