 Crank Bolt, It’s Not M8 x1.25 |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Mblizzard |
 Aug 18 2019, 06:28 AM
Post
#1
|
|
Advanced Member  Group: Members Posts: 3,033 Joined: 28-January 13 From: Knoxville Tn Member No.: 15,438 Region Association: South East States  |
This not a stock crank. The stock is M8 x1.25. I am sure this is some variation of the AA 78 mm crank but the bolt into nose of crank is clearly not stock.
As near as I can tell it is a M7 1.25. 1.0 is too coarse to start. Anyone know for sure what the threads are on these cranks and where to get the bolt? Type 4 store online has the stock bolt. |
   |
 
|
Posts in this topic
Mblizzard Crank Bolt Aug 18 2019, 06:28 AM
Mark Henry It should be M8, I'd try chasing it with a tap... Aug 18 2019, 08:21 AM
Mblizzard
It should be M8, I'd try chasing it with a ta... Aug 18 2019, 09:25 AM Superhawk996 Useful trivia on ISO metric fasteners and trying t... Aug 18 2019, 01:02 PM Mblizzard
Useful trivia on ISO metric fasteners and trying ... Aug 19 2019, 09:27 AM mepstein My Moto Morini motorcycle tank is held on with M7 ... Aug 18 2019, 03:36 PM Mark Henry
My Moto Morini motorcycle tank is held on with M7... Aug 19 2019, 07:44 AM mepstein
My Moto Morini motorcycle tank is held on with M... Aug 19 2019, 08:08 AM HAM Inc Any chance it was improperly tapped to a U.S. size... Aug 18 2019, 04:57 PM draganc
Any chance it was improperly tapped to a U.S. siz... Aug 18 2019, 10:51 PM Mblizzard
Any chance it was improperly tapped to a U.S. siz... Aug 19 2019, 09:30 AM mb911 Maybe a 5/16 sae bolt as they are Very similar to ... Aug 19 2019, 10:25 AM Superhawk996 If you can just barely get a 6.5mm drill in there ... Aug 19 2019, 12:58 PM Mblizzard Went to 2 bolt specialty stores today. Neither one... Aug 19 2019, 04:20 PM mb911 That is terrible.. How is that even possible?? Aug 19 2019, 04:57 PM Mark Henry Take it to a machine shop they can tell you what t... Aug 19 2019, 05:56 PM Superhawk996
Take it to a machine shop they can tell you what ... Aug 19 2019, 06:36 PM mepstein
Take it to a machine shop they can tell you what... Aug 19 2019, 07:26 PM HAM Inc Drill and tap it for a M10 Bolt. Aug 19 2019, 08:03 PM porschetub I might be a bit thick but you are talking about t... Aug 20 2019, 12:53 AM Superhawk996
I might be a bit thick but you are talking about ... Aug 20 2019, 04:52 AM Mblizzard With lots of good advice from everyone and working... Aug 20 2019, 09:32 AM Mark Henry :agree: Since it's new from T4store it's... Aug 20 2019, 11:02 AM Mblizzard This is what it is suppose to do.
Aug 20 2019, 12:02 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 6th May 2024 - 05:03 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.