 Replace battery tray (Tray only not support), Battery tray replacement question |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Wyvern |
 Oct 18 2019, 07:17 PM
Post
#1
|
|
Member  Group: Members Posts: 324 Joined: 7-October 15 From: San Francisco (East Bay) Member No.: 19,245 Region Association: Northern California  |
Looking to replace my battery tray ..
only the tray. I see loads of info on doing the support and tray . My biggest question how to remove the tray only? The long weld I can deal with but to remove the tray from the stand ... Just keep grinding the tray till it can be separated or cut it down and just weld on top of the smaller "good section left? |
   |
 
|
Posts in this topic
Wyvern Replace battery tray (Tray only not support) Oct 18 2019, 07:17 PM
mtndawg http://www.914world.com/bbs2/index.php?sho...p;#en... Oct 19 2019, 12:10 AM Rand Only the tray. This should become a new quote here... Oct 19 2019, 03:53 AM Rand If you can grind you are good. It is sheet metal. Oct 19 2019, 04:00 AM Tdskip I did the tray only on the ‘73 1.7 car by drill ... Oct 19 2019, 09:32 AM bbrock I'd pick up a Harbor Freight spot weld cutter ... Oct 19 2019, 09:45 AM
dr914@autoatlanta.com
I'd pick up a Harbor Freight spot weld cutter... Oct 19 2019, 09:53 AM Wyvern Thanks to all .
I'll try the HF tool and if th... Oct 19 2019, 04:55 PM Rand I really wish you would look under there. If the t... Oct 19 2019, 05:09 PM Wyvern Good advice ... it really is only the tray ( Hell ... Oct 20 2019, 12:08 AM roblav1 Agree those HF cutters are awful. Cobalt drill bi... Oct 20 2019, 07:34 AM bbrock
Agree those HF cutters are awful. Cobalt drill b... Oct 20 2019, 09:15 AM IronHillRestorations I mark the spot welds with a punch and use a Blair... Oct 20 2019, 10:57 AM Rand The spot welds are piddle. If the tray is rusted, ... Oct 20 2019, 12:25 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 6th May 2024 - 12:30 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.