Looking to put together a GB for SS Vintage speed Exhaust, Should be in the $525+ shipping Have Both Ben's and Vintage speed in stock |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Looking to put together a GB for SS Vintage speed Exhaust, Should be in the $525+ shipping Have Both Ben's and Vintage speed in stock |
Mikey914 |
Mar 17 2020, 01:11 AM
Post
#1
|
The rubber man Group: Members Posts: 12,638 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
We have been working with Vintage speed to try to put together a GB and we finally got numbers together. The catch, we need 25 units to make it happen. We will be bringing them over ocean freight, so the final numbers will be in shipping, but will be much cheaper than bringing in individually.
I have seen some of their work, and will have a sample prior to the shipment. I've been real happy with what I have seen so far, and think these would be a great option to the current options. Who's in? List is $693 without shipping https://www.youtube.com/watch?v=kb07sMAJJ7s...eature=youtu.be Attached thumbnail(s) |
bdstone914 |
Mar 17 2020, 03:46 AM
Post
#2
|
bdstone914 Group: Members Posts: 4,508 Joined: 8-November 03 From: Riverside CA Member No.: 1,319 |
|
mb911 |
Mar 17 2020, 05:52 AM
Post
#3
|
914 Guru Group: Members Posts: 6,801 Joined: 2-January 09 From: Burlington wi Member No.: 9,892 Region Association: Upper MidWest |
|
Mikey914 |
Mar 17 2020, 09:56 AM
Post
#4
|
The rubber man Group: Members Posts: 12,638 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
Still not too late Ben
|
mb911 |
Mar 17 2020, 10:06 AM
Post
#5
|
914 Guru Group: Members Posts: 6,801 Joined: 2-January 09 From: Burlington wi Member No.: 9,892 Region Association: Upper MidWest |
|
Mark Henry |
Mar 17 2020, 10:36 AM
Post
#6
|
that's what I do! Group: Members Posts: 20,065 Joined: 27-December 02 From: Port Hope, Ontario Member No.: 26 Region Association: Canada |
I'm looking for a VS one for my '67 bus, but if you do a deal with Ben I'd likely be interested in a /6 muffler.
|
KSCarrera |
Mar 17 2020, 11:22 AM
Post
#7
|
Member Group: Members Posts: 306 Joined: 31-January 19 From: UK Member No.: 22,846 Region Association: England |
MT (owner of Vintage Speed) made the first one you see here for me and then I suggested there might be a wider market for them. Hence, the first is a 2.0-litre type but what MT was asking is if anyone has a stock 1.7 muffler in good condition that he can use as a pattern for measurements etc. Knowing MT, he'll look to widen the range eventually – if you check his range of VW mufflers, you'll see what I mean. Best thing is to drop him an e-mail: shop@vintagespeed.com.tw. or call +886 4 2359 2422 - or message through the Vintage Speed Facebook page |
Cairo94507 |
Mar 17 2020, 02:32 PM
Post
#8
|
Michael Group: Members Posts: 9,703 Joined: 1-November 08 From: Auburn, CA Member No.: 9,712 Region Association: Northern California |
I would rather support Ben and I hope 914 Rubber and Ben can get together on this and make it happen. Ben's products are top drawer and he stands behind his work. (IMG:style_emoticons/default/beerchug.gif)
|
djway |
Mar 17 2020, 05:44 PM
Post
#9
|
Senior Member Group: Members Posts: 787 Joined: 16-October 15 From: Riverside Member No.: 19,266 Region Association: Southern California |
My 914 motor kinda accidentally fell into my Notchback.
Depending on the version I could use one. |
Coondog |
Mar 17 2020, 06:02 PM
Post
#10
|
Advanced Member Group: Members Posts: 2,089 Joined: 24-September 15 From: Apple Valley Calif Member No.: 19,195 Region Association: Southern California |
I would rather support Ben and I hope 914 Rubber and Ben can get together on this and make it happen. Ben's products are top drawer and he stands behind his work. (IMG:style_emoticons/default/beerchug.gif) 100% agree. |
framos914 |
Mar 17 2020, 08:00 PM
Post
#11
|
Member Group: Members Posts: 125 Joined: 15-May 14 From: Corona California Member No.: 17,353 Region Association: Southern California |
I would be interested. Will look for updates on final version
|
DucRS |
Mar 17 2020, 10:28 PM
Post
#12
|
Member Group: Members Posts: 105 Joined: 29-May 19 From: Riverbank CA Member No.: 23,173 Region Association: Central California |
I too would be interested for a 2.0
|
davehg |
Mar 17 2020, 11:06 PM
Post
#13
|
Member Group: Members Posts: 182 Joined: 19-September 17 From: PNW Member No.: 21,443 Region Association: Pacific Northwest |
For me, looks are important but how it sounds and performs are key. It would help if you could post more details on performance. These look quite exquisite, very jewel like especially the exhaust ports. A sound sample would absolutely help, as the note is pretty key. At least for me it is - exhausts have such a distinct tone that it is hard to spend that kind of money without hearing them via a video sample.
I have two of Ben’s stainless mufflers - a single pipe outlet and his dual pipe GT version, plus his flat six header/heat exchangers. They are wonderfully crafted, with beautiful welds, and they really look the business. I am looking forward to hear how Ben’s headers and single pipe version perform on my 2.7 twin plug, but that is a ways off as the restoration is on a slower track for a few months, and I have yet to hear the sound of the single pipe exhaust. I did put 1600 miles in four days (road trip) on his GT dual pipe muffler on my injected 3.2 car and it is LOUD, probably too much so for me for the street, but would work fine for the track and really shrieks at full throttle (in a good way for the track, but less so when Officer friendly is nearby). I understand the latest GT versions may have been revised since mine was made and may be quieter with less drone in the 2500-4500 rpm range. For the street, at least for my tastes, I love the tone of the Dansk mufflers which have a nice growl. I only wish the Dansk versions looked as nice as the Vintage or Ben’s mufflers, and for the price Ben offers these on the forum, it is hard to pay retail for a Dansk when for the same $$ you can get stainless. Plus, Ben has stepped up in support of the 914 community in many other projects, like his oil tanks and lines, and engine tins. I like supporting those kind of guys. It sounds like the Vintage GB deal would only be for the four cylinder cars in any event. |
bdstone914 |
Mar 18 2020, 12:01 AM
Post
#14
|
bdstone914 Group: Members Posts: 4,508 Joined: 8-November 03 From: Riverside CA Member No.: 1,319 |
@Mikey914
@DAVEHG https://store.vintagespeed.com.tw/Classic-PORSCHE-c33996821 What exactly are you planning to bring in? They list six different mufflers for 914. Not much info on any of them. They have a chart on the site about sound but dont say how it relates to any of the 914 models. By personal vote is working with Ben and a stock location exit. I hate the shin ripper pipes. They get grounded out on 914's when you transition to a angle like entering a driveway. |
davehg |
Mar 18 2020, 01:23 PM
Post
#15
|
Member Group: Members Posts: 182 Joined: 19-September 17 From: PNW Member No.: 21,443 Region Association: Pacific Northwest |
look @Mikey914 @DAVEHG https://store.vintagespeed.com.tw/Classic-PORSCHE-c33996821 What exactly are you planning to bring in? They list six different mufflers for 914. Not much info on any of them. They have a chart on the site about sound but dont say how it relates to any of the 914 models. Doesn’t look like they have a /6 option unless you go with the full headers for an early 911, and my they are pricey!. They should do a version with just the muffler only. I will say, their exhaust ports/pipes on the end of the muffler look nice - I like how they are internally beveled. |
Superhawk996 |
Mar 18 2020, 03:32 PM
Post
#16
|
914 Guru Group: Members Posts: 5,725 Joined: 25-August 18 From: Woods of N. Idaho Member No.: 22,428 Region Association: Galt's Gulch |
I too would be interested for a 2.0 Ben has already produced a 2.0L 914/4 stainless exhaust. Ready to roll. I purchased the first one. A hand crafted work of art. Top notch build quality and is hand weld TIG which is the gold standard for Stainless Exhuast fabrication. |
913B |
Mar 18 2020, 05:10 PM
Post
#17
|
Senior Member Group: Members Posts: 843 Joined: 25-April 05 From: South Bay/SoCal Member No.: 3,983 Region Association: None |
(IMG:style_emoticons/default/popcorn[1].gif) I may be interested.
|
mb911 |
Mar 18 2020, 05:17 PM
Post
#18
|
914 Guru Group: Members Posts: 6,801 Joined: 2-January 09 From: Burlington wi Member No.: 9,892 Region Association: Upper MidWest |
Thanks for the support guys.. I talked with Mark and are looking at options. I won't muddy up this thread at all..
|
porschetub |
Mar 18 2020, 11:10 PM
Post
#19
|
Advanced Member Group: Members Posts: 4,696 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None |
I would rather support Ben and I hope 914 Rubber and Ben can get together on this and make it happen. Ben's products are top drawer and he stands behind his work. (IMG:style_emoticons/default/beerchug.gif) (IMG:style_emoticons/default/agree.gif) not much more to say really unsure why 914rubber has gone this direction. |
Mikey914 |
Mar 19 2020, 05:00 AM
Post
#20
|
The rubber man Group: Members Posts: 12,638 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
I would rather support Ben and I hope 914 Rubber and Ben can get together on this and make it happen. Ben's products are top drawer and he stands behind his work. (IMG:style_emoticons/default/beerchug.gif) (IMG:style_emoticons/default/agree.gif) not much more to say really unsure why 914rubber has gone this direction. We simply didn’t have the collaboration to go any other way. We had been approached by a potential new vendor and simply are trying to support these cars. Ben and I are currently in conversation as to what we can do to help develop a relationship to support his products. And yes, there will be a GB as we try to help him to develop a product line, even making some of the flanges he will need to make them. So yes we left this up as we have been working with this vendor. And yes if you really want one of these sign up, we need 25 to make it work., and in fairness we will see where it goes. However, do look for an announcement for a GB we will do with Ben. We have been a supporter of his for quite some time, just need to work out a few things. Mark |
Lo-Fi Version | Time is now: 19th April 2024 - 06:42 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |