Any shelter in place projects ? non-914 is OK !, what are you working on ? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Any shelter in place projects ? non-914 is OK !, what are you working on ? |
rgalla9146 |
Mar 22 2020, 01:54 PM
Post
#1
|
Advanced Member Group: Members Posts: 4,545 Joined: 23-November 05 From: Paramus NJ Member No.: 5,176 Region Association: None |
We couldn't find a small bakers rack for the kitchen.
Plenty of time on our hands..... What to do ? Needed to fit in a corner. Off to the garage. 1 1/2" x 1 1/2" angle iron 96 " tall Results in place. Shelf material and small details to be determined. Attached thumbnail(s) |
Mueller |
Mar 23 2020, 10:17 AM
Post
#2
|
914 Freak! Group: Members Posts: 17,146 Joined: 4-January 03 From: Antioch, CA Member No.: 87 Region Association: None |
Finally installed new wheels on my bandsaw.
I didn't have to purchase anything new, all this stuff was just sitting around. For the rear, I took some all thread rod and made some delrin bushings to go into the steel tubing. (Bushings not shown) For the front I wanted the wheels to turn. Since the tool is lighter on that end the smaller casters are just fine. I made some aluminum parts to allow the casters to bolt over the .75" square tube. I made a different type of delrin spacers to firmly locate the square tubing. |
Andyrew |
Mar 23 2020, 01:34 PM
Post
#3
|
Spooling.... Please wait Group: Members Posts: 13,376 Joined: 20-January 03 From: Riverbank, Ca Member No.: 172 Region Association: Northern California |
Finally installed new wheels on my bandsaw. I didn't have to purchase anything new, all this stuff was just sitting around. For the rear, I took some all thread rod and made some delrin bushings to go into the steel tubing. (Bushings not shown) For the front I wanted the wheels to turn. Since the tool is lighter on that end the smaller casters are just fine. I made some aluminum parts to allow the casters to bolt over the .75" square tube. I made a different type of delrin spacers to firmly locate the square tubing. Pretty sure I would have just welded the casters on the existing tube (IMG:style_emoticons/default/blink.gif) |
Lo-Fi Version | Time is now: 23rd April 2024 - 02:34 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |