 I need help finding 35mm intake gaskets, 911 engine builders.. I need help |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| brant |
 May 23 2020, 08:54 AM
Post
#1
|
|
914 Wizard  Group: Members Posts: 11,623 Joined: 30-December 02 From: Colorado Member No.: 47 Region Association: Rocky Mountains 
 |
I'm trying to reassemble the induction on a race motor with carbs
went to my gasket selection and found gaskets in 34mm, 35mm, and 36mm in my stash.... unfortunately only 6 of the 35's... and I need 12 with the phenolic blocks So the heads have been worked, and the Intake Port is 35mm looking through different years of factory ports... I see the early S cars are 36mm but somehow I have those extra gaskets in my parts box that are actually 35mm and fit perfectly.... does anyone know where they could have come from? I'd like to buy 35mm Intake gaskets looking at the 2.7 gasket pictured on the pelican site... they appear to be a different shape for the CIS, and although they are 35mm I'm not sure they will work with my carb set up can anyone help guide me? thanks in advance brant |
   |
 
|
| Krieger |
May 23 2020, 09:20 AM
Post
#2
|
|
Advanced Member Group: Members Posts: 4,707 Joined: 24-May 04 From: Santa Rosa CA Member No.: 2,104 Region Association: None
|
If anyone has it it would be Engine Builders Supply in Reno.
|
 |
|
| Luke M |
May 23 2020, 09:29 AM
Post
#3
|
|
Senior Member Group: Members Posts: 1,371 Joined: 8-February 05 From: WNY Member No.: 3,574 Region Association: North East States
|
QUOTE(brant @ May 23 2020, 07:54 AM)  I'm trying to reassemble the induction on a race motor with carbs went to my gasket selection and found gaskets in 34mm, 35mm, and 36mm in my stash.... unfortunately only 6 of the 35's... and I need 12 with the phenolic blocks So the heads have been worked, and the Intake Port is 35mm looking through different years of factory ports... I see the early S cars are 36mm but somehow I have those extra gaskets in my parts box that are actually 35mm and fit perfectly.... does anyone know where they could have come from? I'd like to buy 35mm Intake gaskets looking at the 2.7 gasket pictured on the pelican site... they appear to be a different shape for the CIS, and although they are 35mm I'm not sure they will work with my carb set up can anyone help guide me? thanks in advance brant Hi Brant, Post a pic of the gasket. I'll take a look and see if I have any spares here. |
|
|
|
| Krieger |
May 23 2020, 09:33 AM
Post
#4
|
|
Advanced Member Group: Members Posts: 4,707 Joined: 24-May 04 From: Santa Rosa CA Member No.: 2,104 Region Association: None
|
Other strong possibilities: PMO, Paul Abbott are carburetor kings.
|
|
|
|
| brant |
May 23 2020, 10:50 AM
Post
#5
|
|
914 Wizard Group: Members Posts: 11,623 Joined: 30-December 02 From: Colorado Member No.: 47 Region Association: Rocky Mountains
|
QUOTE(Luke M @ May 23 2020, 09:29 AM) QUOTE(brant @ May 23 2020, 07:54 AM) I'm trying to reassemble the induction on a race motor with carbs went to my gasket selection and found gaskets in 34mm, 35mm, and 36mm in my stash.... unfortunately only 6 of the 35's... and I need 12 with the phenolic blocks So the heads have been worked, and the Intake Port is 35mm looking through different years of factory ports... I see the early S cars are 36mm but somehow I have those extra gaskets in my parts box that are actually 35mm and fit perfectly.... does anyone know where they could have come from? I'd like to buy 35mm Intake gaskets looking at the 2.7 gasket pictured on the pelican site... they appear to be a different shape for the CIS, and although they are 35mm I'm not sure they will work with my carb set up can anyone help guide me? thanks in advance brant Hi Brant, Post a pic of the gasket. I'll take a look and see if I have any spares here. I can a super nice offer but I want to buy spares too... so hoping to find the source so I can buy 24 of them. super nice offer sir! I'll start calling around thanks guys brant brant |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 14th May 2024 - 07:24 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.