 Replaced Shifter Bushings, Now it pops out of 5th Gear |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| gonzo54 |
 May 24 2020, 04:30 PM
Post
#1
|
|
Orange Crush  Group: Members Posts: 224 Joined: 10-May 19 From: Seal Beach, CA Member No.: 23,112 Region Association: Southern California 
 |
I need some help from you guys. I just replaced the Ball Cup, Both Coupler Bushings, Firewall Bushing and Shift Rod Bushing at transaxle (AKA Crown Bushing). Went on a test drive and everything is feeling much tighter and smoother-got into 5th Gear and it popped out. Tried several times and it continues to pop out-I don't want to keep on trying it in 5th and cause a problem or chip an tooth since it is not going in all the way. I didn't have any problems with popping out of any gears prior to replacing the bushings.
I've search the forum and haven't been able to find how to adjust the linkage. Thanks-Rick |
   |
 
|
Posts in this topic
gonzo54 Replaced Shifter Bushings May 24 2020, 04:30 PM
Mike Bellis Put the shifter in 5th gear, Use a bungee to hold ... May 24 2020, 05:26 PM
gonzo54
Put the shifter in 5th gear, Use a bungee to hold... May 24 2020, 05:42 PM Frankvw Hi gonzo54, did the advice of Mike solve the issu... May 26 2020, 01:56 PM gonzo54
Hi gonzo54, did the advice of Mike solve the iss... May 26 2020, 08:50 PM rhodyguy In gerneral, always mark and index current linkage... May 26 2020, 02:13 PM Mikey914 I suspect it is just an adjustment as 5th generall... May 26 2020, 02:57 PM second wind Ok...I have been tackling this for years...getting... May 26 2020, 10:53 PM second wind On both sides of the bushing....outer and inner...... May 26 2020, 11:16 PM Frankvw gonzo54 : that was a good and bad moment at the sa... May 27 2020, 12:38 AM Porschef I also found the bronze bushing to be a little too... May 27 2020, 04:35 AM porschetub I had to file the hole out to fit this type of bus... May 27 2020, 01:47 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd May 2024 - 07:18 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.