 Further speedo drive seal issues,, found my problem..I think. |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| porschetub |
 Jun 2 2020, 10:05 PM
Post
#1
|
|
Advanced Member  Group: Members Posts: 4,696 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None  |
Small leak @ the angle drive,done the housing seal and while under the car found the leak was coming out the cable drive and leaking down there.
Sure I had a shaft seal that I bought some time ago and after a search think I found it. Can anyone confirm it is 10 x 18 x 6mm ?. TIA. |
   |
 
|
| bdstone914 |
Jun 3 2020, 08:45 AM
Post
#2
|
|
bdstone914 Group: Members Posts: 4,508 Joined: 8-November 03 From: Riverside CA Member No.: 1,319 |
porschetub
date='Jun 2 2020, 09:05 PM' post='2821572'] Small leak @ the angle drive,done the housing seal and while under the car found the leak was coming out the cable drive and leaking down there. Sure I had a shaft seal that I bought some time ago and after a search think I found it. Can anyone confirm it is 10 x 18 x 6mm ?. TIA. [/quote] Tip on removing the old seal. Carve out the pladtic with a knife. Screw in a lug bolt (14 x 1.5 ). It will catch the lip of tbe metal vup and pull it out. The washer sticks to the top of the seal. Dig it out first. I have a new batch of the speedo drive bushings reworked with the second groove to reduce leaks. Or if you have access to a lathe cut a second groove the same size as the oroginal groove. |
|
|
|
| porschetub |
Jun 3 2020, 02:39 PM
Post
#3
|
|
Advanced Member Group: Members Posts: 4,696 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None |
[quote name='bdstone914' date='Jun 4 2020, 02:45 AM' post='2821668']
porschetub date='Jun 2 2020, 09:05 PM' post='2821572'] Small leak @ the angle drive,done the housing seal and while under the car found the leak was coming out the cable drive and leaking down there. Sure I had a shaft seal that I bought some time ago and after a search think I found it. Can anyone confirm it is 10 x 18 x 6mm ?. TIA. [/quote] Tip on removing the old seal. Carve out the pladtic with a knife. Screw in a lug bolt (14 x 1.5 ). It will catch the lip of tbe metal vup and pull it out. The washer sticks to the top of the seal. Dig it out first. I have a new batch of the speedo drive bushings reworked with the second groove to reduce leaks. Or if you have access to a lathe cut a second groove the same size as the oroginal groove. [/quote] Found the original packaging and all is good I have the right one. Thanks for the tip Bruce ,never done one of these before (IMG:style_emoticons/default/beerchug.gif) . |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 20th April 2024 - 06:32 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.