 Axle bolts and Pins, I done messed up |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tvdinnerbythepool |
 Aug 7 2020, 07:56 AM
Post
#1
|
|
Member  Group: Members Posts: 310 Joined: 24-July 18 From: Olympia, WA Member No.: 22,336 Region Association: Pacific Northwest 
 |
Axle fell of the transmission yesterday. Bent a bolt and sheared a bolt. The other two appear to be fine and just loosened themselves out.
My assumption is I didn't torque them down correctly. Question is..... Bolt size? I have M8 special bit And... There are 6 holes....4 bolts and 2 alignment pins correct? I appear to have lost those 2 pins when the axle came off. Source for the 2 pins? Thanks all! -R  |
   |
 
|
Posts in this topic
tvdinnerbythepool Axle bolts and Pins Aug 7 2020, 07:56 AM
tvdinnerbythepool RE: Axle bolts and Pins Aug 7 2020, 07:57 AM GregAmy There's four bolts each axle, two drive pins.
... Aug 7 2020, 08:28 AM Tbrown4x4 I should have what you need Rob. Let me do a littl... Aug 7 2020, 08:46 AM Superhawk996 Not an attempt to kick you while you're down. ... Aug 7 2020, 09:13 AM bdstone914 All good advise. Another tip is put a drop of pain... Aug 7 2020, 09:17 AM
Superhawk996
All good advise. Another tip is put a drop of pai... Aug 7 2020, 09:25 AM tvdinnerbythepool As always, thanks to all of you.
Todd has got some... Aug 7 2020, 09:51 AM Superhawk996
As always, thanks to all of you.
. . . I am plac... Aug 7 2020, 11:00 AM rhodyguy Not so sure the outer hub recesses are supposed to... Aug 7 2020, 02:10 PM Superhawk996
Also known as 'Belleville'. Spelling migh... Aug 8 2020, 09:18 AM Superhawk996
They work well for the intakes on carbed cars rat... Aug 8 2020, 09:35 AM PanelBilly If you didn’t already order the bolts, I’m pre... Aug 7 2020, 02:37 PM PanelBilly I looked and only found M10 Aug 7 2020, 02:53 PM ClayPerrine 100% agree with using the torque wrench. At one t... Aug 7 2020, 06:00 PM porschetub Make sure you check the threads on the broken and ... Aug 7 2020, 06:39 PM IronHillRestorations I don’t know if it makes a difference but I like... Aug 8 2020, 05:10 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st May 2024 - 02:12 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.