 Let's talk high performance CVs/Axles, What are today's options |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| vintage914racer |
 Sep 21 2020, 12:37 PM
Post
#1
|
|
Member  Group: Members Posts: 429 Joined: 28-December 03 From: Minneapolis, MN Member No.: 1,473  |
I became the member of the failed CV joint club when the inner joint on my 914-6 vintage racer exploded entering turn-one at Road America. Just to spice things up, the tranny I was running has a welded diff, so the failure sent me into a spin....fortunately I avoided contact damage.
My winter project is to upgrade to a guard LSD and find beefier CVs that can handle the power my car is putting out. I know there are options out there that consist of taking other Porsche CVs and adapting for use. I'm hoping to find an off the shelf option, as my available time to tinker in the garage is limited these days. I see Tarett sells high performance half shafts and I know Renegade does or did at one time. Is there anything else out there that I should know about? |
   |
 
|
Posts in this topic
vintage914racer Let's talk high performance CVs/Axles Sep 21 2020, 12:37 PM
brant lots out there.
you can upgrade to 944 joints fair... Sep 21 2020, 12:42 PM
ClayPerrine
is your chassis braced on the rear swing arm mou... Sep 21 2020, 01:04 PM
brant
is your chassis braced on the rear swing arm mo... Sep 21 2020, 01:09 PM vintage914racer
lots out there.
you can upgrade to 944 joints fai... Sep 21 2020, 01:40 PM Mark Henry My 901/914 trans I have the 108mm CV's, hubs, ... Sep 22 2020, 09:11 AM 914forme Nice Mark - good call on the G50 parts over the 93... Sep 22 2020, 06:34 PM Mark Henry
Nice Mark - good call on the G50 parts over the 9... Sep 22 2020, 06:53 PM sixnotfour The fact you had a welded diff, that alone will le... Sep 24 2020, 09:27 PM mb911 What about the bolt on cv/axle kit from tarret? Se... Sep 25 2020, 05:48 AM vintage914racer
What about the bolt on cv/axle kit from tarret? S... Dec 18 2020, 10:00 AM Gary I'm running a 108mm setup also:
* 1970 - 1973... Dec 18 2020, 11:51 AM 914Sixer Using 911SC hubs, stubs and 915 coarse spline tran... Dec 18 2020, 05:02 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 29th April 2024 - 07:21 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.