Another GT Look-a-Likey Project thread, Made a gas strut lifted air dam to clear my driveway |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Another GT Look-a-Likey Project thread, Made a gas strut lifted air dam to clear my driveway |
john77 |
Oct 1 2020, 04:04 PM
Post
#1
|
Senior Member Group: Members Posts: 621 Joined: 21-February 14 From: Los Angeles Member No.: 17,027 Region Association: Southern California |
Started the process of GT flaring my car this week.
(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-17027-1601589977.1.jpg) The plan is to weld all four flares on first, then widen the rears to fit 9s, and in the process strip the car panel by panel for a repaint. The rear arches had been pulled at some point in the 90s to fit 7s, and I knew they'd gone to town with bondo to smooth the driver's side out because there was a crack. The picture below is a cross section cut through the arch once I removed it... that's 0.5 inches of bondo right there (IMG:style_emoticons/default/blink.gif) (IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-17027-1601589886.1.jpg) After making the initial rough cuts it dawned on me I'm probably going to need to remove the rear quarter oil tank to give me enough clearance to tig weld the flare on the front and back. I can only see one bolt, inside the engine bay - is that the only thing holding the tank in place? Also, dumb question, can I remove the tank without having to drain my engine oil first? I didn't think this far ahead and only changed my oil last month (IMG:style_emoticons/default/headbang.gif) |
John |
Oct 13 2020, 09:38 PM
Post
#2
|
member? what's a member? Group: Members Posts: 3,393 Joined: 30-January 04 From: Evansville, IN (SIRPCA) Member No.: 1,615 Region Association: None |
I run 9x16 on all 4 corners on the track car and have for more than 30 years. I never machined any wheels. I have had several sets and they all fit. Of course, these flares have been on the car since 1983-ish. I fully expect to be able to do the same with my current project (flares I bought in a group buy back in 2004-2005)
|
john77 |
Oct 13 2020, 10:02 PM
Post
#3
|
Senior Member Group: Members Posts: 621 Joined: 21-February 14 From: Los Angeles Member No.: 17,027 Region Association: Southern California |
@John Were any of those sets Group 4 Campagnolos? This is literally what I’ve been told by someone who’s running the exact same wheels I plan to run. Maybe the offset is different.
I run 9x16 on all 4 corners on the track car and have for more than 30 years. I never machined any wheels. I have had several sets and they all fit. Of course, these flares have been on the car since 1983-ish. I fully expect to be able to do the same with my current project (flares I bought in a group buy back in 2004-2005) |
Lo-Fi Version | Time is now: 19th April 2024 - 11:52 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |