 Throttle return spring, to weak to close intake completely |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Arno914 |
 Apr 14 2021, 03:52 AM
Post
#1
|
|
Member  Group: Members Posts: 233 Joined: 13-May 20 From: near Frankfurt, Germany Member No.: 24,260 Region Association: Germany 
 |
After installing new bushings in the pedal cluster the engine idles too high. Reason is that the throttle body return spring seems a bit too weak to fully close the intake on my 1971/4. (The pedal moves freely, but now with a bit more friction due to less play and some grease.)
A Little push with the finger and idle is okay. Is there any possibility to add a second spring like on the later cars? Or should I just install a heavier spring to solve this issue? Any comments on this will be appreciated. Greetings, Arno |
   |
 
|
Posts in this topic
Arno914 Throttle return spring Apr 14 2021, 03:52 AM
wonkipop you only changed one thing mate.
sounds like its s... Apr 14 2021, 04:07 AM Frank S Are you 100% sure you didn't twist the throttl... Apr 14 2021, 04:37 AM bdstone914 Also check the rubber gas pedal. It acts as a spr... Apr 14 2021, 03:21 PM
JamesM
Also check the rubber gas pedal. It acts as a sp... Apr 14 2021, 03:30 PM jim_hoyland I had a similar issue; turned out the moving parts... Apr 14 2021, 05:03 PM Arno914 Hello all,
thank you for your replies. I checked ... Apr 15 2021, 01:44 AM VaccaRabite If you give the cable some free play, make sure th... Apr 15 2021, 07:15 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd May 2024 - 02:31 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.