 CV components, What am I looking for? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Speedo |
 May 16 2021, 11:19 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 529 Joined: 7-November 06 From: Boulder Member No.: 7,170 Region Association: Rocky Mountains 
 |
Dismantling and rebuilding my axles. Inner CVs were fine, just nasty. Outer CVs were so crusty I'm surprised they turned. Lot of sand/dirt in the joint and one of my inner races has some pitting so I'd rather not re-use it. I have been told the splines (and therefore the inner races) are different on the six. So if I need to replace an inner race, what am I looking for? Are the splines and inner race the same as an early 911?
 |
   |
 
|
  |
Replies
| Speedo |
May 16 2021, 12:15 PM
Post
#2
|
|
Senior Member Group: Members Posts: 529 Joined: 7-November 06 From: Boulder Member No.: 7,170 Region Association: Rocky Mountains
|
Ok so I just read several threads on this and now know I need components that work with 25 spline axles. From what I have read, it appears that early 911 axles also have 25 splines. I have a couple 911 axles which I am going to measure and maybe with a little luck the inner race/bearings will be the same. I will report back.
|
|
|
|
Posts in this topic
Speedo CV components May 16 2021, 11:19 AM
Speedo So I took a 911 axle off the shelf and disassemble... May 16 2021, 05:31 PM
Bleyseng I thought the CV pieces were matched and you shoul... May 17 2021, 06:38 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 23rd May 2024 - 07:55 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.