Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Testing headlight motors
partwerks
post May 16 2021, 01:42 PM
Post #1


Senior Member
***

Group: Members
Posts: 1,593
Joined: 7-September 06
From: Grand Island, NE
Member No.: 6,787



Have the current headlamps assembly out of car for about 6 months now, for some body work, and also have a spare pair.

The ones I had in the car were in working order when removed, but thought I would also check them along with the spares.
I couldn't get any of them to work? I had 6 relays to try and use.
I put the negative on the ground, and then wired the red, and either gray or green to the red, and hooked to the positive, and put power to it, and then switch to either the green or gray wire again, but no response either way.

Not sure if I am doing it wrong, but followed what was in the video at about a minute in.
https://www.youtube.com/watch?v=lx5tKgLG-_k
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 21st May 2024 - 08:27 AM