Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Chokes the same on Weber 32/36 DFEV vs. DGEV?
Chaznaster
post Sep 15 2021, 07:44 PM
Post #1


Member
**

Group: Members
Posts: 284
Joined: 22-November 15
From: Concord, MA
Member No.: 19,389
Region Association: North East States



Hi.
Does anyone here know if the electric choke modules are interchangeable between the Weber DGEV and DFEV 32/62’s?
I have been scouring the internet for this topic without any clear conclusion.
Thanks much!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
JamesM
post Sep 15 2021, 08:28 PM
Post #2


Senior Member
***

Group: Members
Posts: 1,872
Joined: 6-April 06
From: Kearns, UT
Member No.: 5,834
Region Association: Intermountain Region



IDK but you could compare the individual part numbers and see.

https://www.carbparts.eu/exploded_view/WEBER_32-36_DFAV-DFEV

https://www.carbparts.eu/exploded_view/WEBER_32-36_DGAV-DGEV


User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Chaznaster
post Sep 16 2021, 04:36 PM
Post #3


Member
**

Group: Members
Posts: 284
Joined: 22-November 15
From: Concord, MA
Member No.: 19,389
Region Association: North East States



Thanks JamesM. I appreciate the links. I am still reasonably new to this and not savvy about finding parts lists, etc. It looks like the are different: x.332 for the DF series and x.333 for the DG. Probably mirror images like the carbs are.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
porschetub
post Sep 16 2021, 08:24 PM
Post #4


Advanced Member
****

Group: Members
Posts: 4,695
Joined: 25-July 15
From: New Zealand
Member No.: 18,995
Region Association: None



QUOTE(Chaznaster @ Sep 17 2021, 10:36 AM) *

Thanks JamesM. I appreciate the links. I am still reasonably new to this and not savvy about finding parts lists, etc. It looks like the are different: x.332 for the DF series and x.333 for the DG. Probably mirror images like the carbs are.

Should fit both carbs ,do you really need it? these take careful setting otherwise they stay on too long and fuel wash your engine,if they stay on all the time they will destroy your engine rather quickly,fuel is a crappy lubricate.
These carbs are based on motors that used a coolant water feed choke (bymetal )and that worked fine till you had a bad thermostat or coolant leaks.
Unless you live in a very cold year round climate don't bother,3-4 pumps on the throttle and a short warm should be fine with the choke set fully open.
Good luck.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 28th March 2024 - 07:51 AM