Tangerine Racing Throttle Linkage, Considering, installed PICS request? Options

[sdoolin]

I have my carbs off (Dellortos) for inspection/cleaning. Am considering the Tangerine Racing throttle linkage kit. Since I am in there and all.

I have been using a hex bar linkage in some form another my entire adult life, so am VERY familiar with it, and have never had too much trouble synching carbs. That said, I can see the benefits of the Tangerine Racing "linkage".

Wondering if anyone can provide pics of an installed system? I am partial to the customized hex bar and throttle cable bracket that I am running, so want to see what the Tangerine system looks like installed (and perhaps with Dellortos). Especially interested in how/where the throttle cable (from the pedal) is bracketed/attached to operate the cable(s).

Thanks in advance for any help (pics).

[Mark Henry]

Anything is better than hex bar, but I'm on the fence as to whether the cable set-up is better than a good center pull. Cable systems suffer from cable slack, where you have to have a a tiny bit of slack in the cable or it pulls one carb off the stop screw. To me slack equals slop and I tend to have better luck with the center pull, YMMV.

BTW I have a tangerine cable pull sitting on weber 44s right in front of me.