Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

24 Pages V « < 9 10 11 12 13 > »   
 Reply to this topicStart new topic
> Red Rocks Classic 2022 - Sept. 15-18, The Premier Porsche 914 event in the Red Rocks West comes to Salt Lake City!
Elvira
post Sep 11 2022, 05:59 PM
Post #201


Mistress of the Dark
**

Group: Members
Posts: 172
Joined: 22-March 19
From: Vegas Baby
Member No.: 22,984
Region Association: NineFourteenerVille
QUOTE(Eric_Shea @ Sep 11 2022, 05:55 PM) *

Wait'll ya see your shirt! (IMG:style_emoticons/default/blink.gif)


Is it Pink.?? (IMG:style_emoticons/default/gayfight.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
sixnotfour
post Sep 11 2022, 07:21 PM
Post #202


914 Wizard
**********

Group: Members
Posts: 11,066
Joined: 12-September 04
From: Life Elevated..planet UT.
Member No.: 2,744
Region Association: Rocky Mountains
QUOTE(Elvira @ Sep 11 2022, 05:59 PM) *

QUOTE(Eric_Shea @ Sep 11 2022, 05:55 PM) *

Wait'll ya see your shirt! (IMG:style_emoticons/default/blink.gif)


Is it Pink.?? (IMG:style_emoticons/default/gayfight.gif)

Salmon..
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Live Event Uploader
post Sep 11 2022, 07:28 PM
Post #203


914 Guru
*****

Group: Members
Posts: 7,853
Joined: 12-May 10
From: 914 World
Member No.: 11,722
Region Association: Northern California
Clean and ready for action

(IMG:http://www.914world.com/bbs2/uploads_offsite/914world.com-6-11722-1662946090.0.jpeg)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SirAndy
post Sep 11 2022, 08:08 PM
Post #204


Resident German
*************************

Group: Admin
Posts: 42,373
Joined: 21-January 03
From: Oakland, Kalifornia
Member No.: 179
Region Association: Northern California
Man, i'd love to drive out and hang out, but the new job is working me hard. There's no way i can swing this right now.
(IMG:style_emoticons/default/sad.gif)
User is online!Profile CardPM
Go to the top of the page
+Quote Post
sixnotfour
post Sep 11 2022, 08:19 PM
Post #205


914 Wizard
**********

Group: Members
Posts: 11,066
Joined: 12-September 04
From: Life Elevated..planet UT.
Member No.: 2,744
Region Association: Rocky Mountains
(IMG:style_emoticons/default/beerchug.gif) Orange GT
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Eric_Shea
post Sep 12 2022, 05:56 PM
Post #206


PMB Performance
***************

Group: Admin
Posts: 19,304
Joined: 3-September 03
From: Salt Lake City, UT
Member No.: 1,110
Region Association: Rocky Mountains
QUOTE(sixnotfour @ Sep 11 2022, 07:21 PM) *

QUOTE(Elvira @ Sep 11 2022, 05:59 PM) *

QUOTE(Eric_Shea @ Sep 11 2022, 05:55 PM) *

Wait'll ya see your shirt! (IMG:style_emoticons/default/blink.gif)


Is it Pink.?? (IMG:style_emoticons/default/gayfight.gif)

Salmon..


Thank you!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
worn
post Sep 12 2022, 07:39 PM
Post #207


Winner of the Utah Twisted Joint Award
****

Group: Members
Posts: 3,518
Joined: 3-June 11
From: Madison, WI
Member No.: 13,152
Region Association: Upper MidWest
Smoke signals from engine to driver: not on fire, but losing oil pretty quick.

Near Radar O'Reily's home in Iowa, I saw clouds of smoke coming from trhe engine bay. No flames. Long story short, a small machine screw holding engine tin had backed out. The worst part is that the screw normally plugged a hole connected to the cam tower oil gallery. Not sure if this is normal for a six, but the oil certainly oozed out of the hole pretty fast. And then onto the headers, giving a warning sound.

So near Cedar Falls Iowa I pulled into a Kum and Go parking lot. Using the stock jack I managed to lift the car and destroy the jack. Anyone looking to sell a stock jack at RRC I am your guy. Got the right rear wheel off and put my new collapsible jack stands in use. To plug the hole I looked around and removed this
Attached Image
This is the donor screw location
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
worn
post Sep 12 2022, 07:42 PM
Post #208


Winner of the Utah Twisted Joint Award
****

Group: Members
Posts: 3,518
Joined: 3-June 11
From: Madison, WI
Member No.: 13,152
Region Association: Upper MidWest
To fill this spot. Experts can chime in as to whether this ought to plug an oil passage on the cam tower.
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
worn
post Sep 12 2022, 07:43 PM
Post #209


Winner of the Utah Twisted Joint Award
****

Group: Members
Posts: 3,518
Joined: 3-June 11
From: Madison, WI
Member No.: 13,152
Region Association: Upper MidWest
Good night from the heartland. Looking for Harbor Freight tomorrow.
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
worn
post Sep 12 2022, 07:49 PM
Post #210


Winner of the Utah Twisted Joint Award
****

Group: Members
Posts: 3,518
Joined: 3-June 11
From: Madison, WI
Member No.: 13,152
Region Association: Upper MidWest
Getting better and better at spotting natural ramps for elevating the car. A deep swale is great.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
914-300Hemi
post Sep 12 2022, 08:05 PM
Post #211


Senior Member
***

Group: Members
Posts: 1,389
Joined: 7-September 06
From: San Dimas, CA
Member No.: 6,794
Region Association: Southern California
QUOTE(worn @ Sep 12 2022, 06:49 PM) *

Getting better and better at spotting natural ramps for elevating the car. A deep swale is great.

Good luck at Harbor Freight tomorrow.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
sixnotfour
post Sep 12 2022, 08:16 PM
Post #212


914 Wizard
**********

Group: Members
Posts: 11,066
Joined: 12-September 04
From: Life Elevated..planet UT.
Member No.: 2,744
Region Association: Rocky Mountains
Shouldnt be a leaker ,,,Check the plug above. It does seal to cam oil circuit. Or a rocker shaft shifted..


Attached image(s)
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mxkinn01
post Sep 12 2022, 08:26 PM
Post #213


Member
**

Group: Members
Posts: 272
Joined: 18-June 17
From: Las Vegas, NV
Member No.: 21,195
Region Association: Southwest Region
QUOTE(worn @ Sep 12 2022, 06:39 PM) *

Smoke signals from engine to driver: not on fire, but losing oil pretty quick.

Near Radar O'Reily's home in Iowa, I saw clouds of smoke coming from trhe engine bay. No flames. Long story short, a small machine screw holding engine tin had backed out. The worst part is that the screw normally plugged a hole connected to the cam tower oil gallery. Not sure if this is normal for a six, but the oil certainly oozed out of the hole pretty fast. And then onto the headers, giving a warning sound.

So near Cedar Falls Iowa I pulled into a Kum and Go parking lot. Using the stock jack I managed to lift the car and destroy the jack. Anyone looking to sell a stock jack at RRC I am your guy. Got the right rear wheel off and put my new collapsible jack stands in use. To plug the hole I looked around and removed this

This is the donor screw location


Warren,
I think I have an extra jack in the garage. Let me take a look. If I do it's yours for free and I'll bring to the RRC.
Mike
User is online!Profile CardPM
Go to the top of the page
+Quote Post
Chris914n6
post Sep 12 2022, 08:32 PM
Post #214


Jackstands are my life.
****

Group: Members
Posts: 3,510
Joined: 14-March 03
From: Las Vegas, NV
Member No.: 431
Region Association: Southwest Region
Anyone coming from the Phoenix AZ area happen to have room to carry a ft hood and bumper?

I'll buy ya a beer or three (IMG:style_emoticons/default/beerchug.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
worn
post Sep 12 2022, 09:26 PM
Post #215


Winner of the Utah Twisted Joint Award
****

Group: Members
Posts: 3,518
Joined: 3-June 11
From: Madison, WI
Member No.: 13,152
Region Association: Upper MidWest
QUOTE(mxkinn01 @ Sep 12 2022, 07:26 PM) *

QUOTE(worn @ Sep 12 2022, 06:39 PM) *

Smoke signals from engine to driver: not on fire, but losing oil pretty quick.

Near Radar O'Reily's home in Iowa, I saw clouds of smoke coming from trhe engine bay. No flames. Long story short, a small machine screw holding engine tin had backed out. The worst part is that the screw normally plugged a hole connected to the cam tower oil gallery. Not sure if this is normal for a six, but the oil certainly oozed out of the hole pretty fast. And then onto the headers, giving a warning sound.

So near Cedar Falls Iowa I pulled into a Kum and Go parking lot. Using the stock jack I managed to lift the car and destroy the jack. Anyone looking to sell a stock jack at RRC I am your guy. Got the right rear wheel off and put my new collapsible jack stands in use. To plug the hole I looked around and removed this

This is the donor screw location


Warren,
I think I have an extra jack in the garage. Let me take a look. If I do it's yours for free and I'll bring to the RRC.
Mike

That would be grand, but I would insist on something in return. Beer, or whatever. Thanks again.
Warren
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
worn
post Sep 12 2022, 09:28 PM
Post #216


Winner of the Utah Twisted Joint Award
****

Group: Members
Posts: 3,518
Joined: 3-June 11
From: Madison, WI
Member No.: 13,152
Region Association: Upper MidWest
QUOTE(sixnotfour @ Sep 12 2022, 07:16 PM) *

Shouldnt be a leaker ,,,Check the plug above. It does seal to cam oil circuit. Or a rocker shaft shifted..

Thanks. I thought so too. But from my very awkward angle it looks like a helicoil or time cert. Perhaps drilled a bit too far? I will double check that oil line.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mgp4591
post Sep 12 2022, 11:46 PM
Post #217


914 Guru
*****

Group: Members
Posts: 5,836
Joined: 1-August 12
From: Salt Lake City Ut
Member No.: 14,748
Region Association: Intermountain Region
QUOTE(mxkinn01 @ Sep 12 2022, 08:26 PM) *

QUOTE(worn @ Sep 12 2022, 06:39 PM) *

Smoke signals from engine to driver: not on fire, but losing oil pretty quick.

Near Radar O'Reily's home in Iowa, I saw clouds of smoke coming from trhe engine bay. No flames. Long story short, a small machine screw holding engine tin had backed out. The worst part is that the screw normally plugged a hole connected to the cam tower oil gallery. Not sure if this is normal for a six, but the oil certainly oozed out of the hole pretty fast. And then onto the headers, giving a warning sound.

So near Cedar Falls Iowa I pulled into a Kum and Go parking lot. Using the stock jack I managed to lift the car and destroy the jack. Anyone looking to sell a stock jack at RRC I am your guy. Got the right rear wheel off and put my new collapsible jack stands in use. To plug the hole I looked around and removed this

This is the donor screw location


Warren,
I think I have an extra jack in the garage. Let me take a look. If I do it's yours for free and I'll bring to the RRC.
Mike

I have an extra one as well that I'll never use. It's yours.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mxkinn01
post Sep 13 2022, 06:50 AM
Post #218


Member
**

Group: Members
Posts: 272
Joined: 18-June 17
From: Las Vegas, NV
Member No.: 21,195
Region Association: Southwest Region
QUOTE(mgp4591 @ Sep 12 2022, 10:46 PM) *

QUOTE(mxkinn01 @ Sep 12 2022, 08:26 PM) *

QUOTE(worn @ Sep 12 2022, 06:39 PM) *

Smoke signals from engine to driver: not on fire, but losing oil pretty quick.

Near Radar O'Reily's home in Iowa, I saw clouds of smoke coming from trhe engine bay. No flames. Long story short, a small machine screw holding engine tin had backed out. The worst part is that the screw normally plugged a hole connected to the cam tower oil gallery. Not sure if this is normal for a six, but the oil certainly oozed out of the hole pretty fast. And then onto the headers, giving a warning sound.

So near Cedar Falls Iowa I pulled into a Kum and Go parking lot. Using the stock jack I managed to lift the car and destroy the jack. Anyone looking to sell a stock jack at RRC I am your guy. Got the right rear wheel off and put my new collapsible jack stands in use. To plug the hole I looked around and removed this

This is the donor screw location


Warren,
I think I have an extra jack in the garage. Let me take a look. If I do it's yours for free and I'll bring to the RRC.
Mike

I have an extra one as well that I'll never use. It's yours.


Warren,
Looks the only one I can find is out of a later model bug, it will work but not an original. You might want to take up @mgp4591 on his offer as well. Here is a pic, let me know.
Mike
Attached Image
User is online!Profile CardPM
Go to the top of the page
+Quote Post
Eric_Shea
post Sep 13 2022, 08:09 AM
Post #219


PMB Performance
***************

Group: Admin
Posts: 19,304
Joined: 3-September 03
From: Salt Lake City, UT
Member No.: 1,110
Region Association: Rocky Mountains
QUOTE(mxkinn01 @ Sep 13 2022, 06:50 AM) *

QUOTE(mgp4591 @ Sep 12 2022, 10:46 PM) *

QUOTE(mxkinn01 @ Sep 12 2022, 08:26 PM) *

QUOTE(worn @ Sep 12 2022, 06:39 PM) *

Smoke signals from engine to driver: not on fire, but losing oil pretty quick.

Near Radar O'Reily's home in Iowa, I saw clouds of smoke coming from trhe engine bay. No flames. Long story short, a small machine screw holding engine tin had backed out. The worst part is that the screw normally plugged a hole connected to the cam tower oil gallery. Not sure if this is normal for a six, but the oil certainly oozed out of the hole pretty fast. And then onto the headers, giving a warning sound.

So near Cedar Falls Iowa I pulled into a Kum and Go parking lot. Using the stock jack I managed to lift the car and destroy the jack. Anyone looking to sell a stock jack at RRC I am your guy. Got the right rear wheel off and put my new collapsible jack stands in use. To plug the hole I looked around and removed this

This is the donor screw location


Warren,
I think I have an extra jack in the garage. Let me take a look. If I do it's yours for free and I'll bring to the RRC.
Mike

I have an extra one as well that I'll never use. It's yours.


Warren,
Looks the only one I can find is out of a later model bug, it will work but not an original. You might want to take up @mgp4591 on his offer as well. Here is a pic, let me know.
Mike


We do have a 914 shop here guys... (IMG:style_emoticons/default/wink.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mxkinn01
post Sep 13 2022, 08:53 AM
Post #220


Member
**

Group: Members
Posts: 272
Joined: 18-June 17
From: Las Vegas, NV
Member No.: 21,195
Region Association: Southwest Region
QUOTE(Eric_Shea @ Sep 13 2022, 07:09 AM) *

QUOTE(mxkinn01 @ Sep 13 2022, 06:50 AM) *

QUOTE(mgp4591 @ Sep 12 2022, 10:46 PM) *

QUOTE(mxkinn01 @ Sep 12 2022, 08:26 PM) *

QUOTE(worn @ Sep 12 2022, 06:39 PM) *

Smoke signals from engine to driver: not on fire, but losing oil pretty quick.

Near Radar O'Reily's home in Iowa, I saw clouds of smoke coming from trhe engine bay. No flames. Long story short, a small machine screw holding engine tin had backed out. The worst part is that the screw normally plugged a hole connected to the cam tower oil gallery. Not sure if this is normal for a six, but the oil certainly oozed out of the hole pretty fast. And then onto the headers, giving a warning sound.

So near Cedar Falls Iowa I pulled into a Kum and Go parking lot. Using the stock jack I managed to lift the car and destroy the jack. Anyone looking to sell a stock jack at RRC I am your guy. Got the right rear wheel off and put my new collapsible jack stands in use. To plug the hole I looked around and removed this
This is the donor screw location


Warren,
I think I have an extra jack in the garage. Let me take a look. If I do it's yours for free and I'll bring to the RRC.
Mike

I have an extra one as well that I'll never use. It's yours.


Warren,
Looks the only one I can find is out of a later model bug, it will work but not an original. You might want to take up @mgp4591 on his offer as well. Here is a pic, let me know.
Mike


We do have a 914 shop here guys... (IMG:style_emoticons/default/wink.gif)


Eric,
I'm trying to get it out of my garage and into his. LOL
But seriously, I do have a handful of parts I'll let go for free and bring them with me if anyone wants/needs them.
(4.5 steel wheels, 1.7 hub caps, older foam steering wheel, a few interior parts, door panel parts)
PM me if you need anything.
Mike
User is online!Profile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

24 Pages V « < 9 10 11 12 13 > » 
Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 17th December 2025 - 09:38 AM
Invision Power Board v9.1.4 © 2025  IPS, Inc.
...
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...