 Red wire with some crispy insulation.... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| advman89 |
 Feb 28 2022, 09:09 PM
Post
#1
|
|
Member  Group: Members Posts: 120 Joined: 8-July 19 From: Chicago, IL Member No.: 23,286 Region Association: Upper MidWest 
 |
I'm in the depths of a full dash replacement and I'm need to figure out a situation.
I have a couple things to address. FUSE 11 (Hazard / Interior Light) has never worked-dead short immediately. I thought I remember someone saying that I need to look at the ground under the passenger seat and the passenger door switch as possible issues there. But I also have a some weirdness with the Hazard too... There is a new square relay installed and some wires cut in from the factory hazard switcher. The turn signals are all working, but I need to get the hazards operational.  And on top of that, I discovered this red wire, long melted...will splice in a new wire, but thought the group might be able to point me in a direction. I know I have a color wiring chart...off to the archives for it to start looking for things.   |
   |
 
|
Posts in this topic
advman89 Red wire with some crispy insulation.... Feb 28 2022, 09:09 PM
914sgofast2 You have my sympathy. I am trying to sort out the ... Feb 28 2022, 09:13 PM VaccaRabite Big red wire is either going from the ignition swi... Feb 28 2022, 09:28 PM Costa05
I'm in the depths of a full dash replacement ... Feb 28 2022, 10:48 PM barnfind9141972 What year is it? I have a 72-73 diagram that’s a... Mar 1 2022, 03:46 AM Spoke About the blue/white wire shorted to the brown wir... Mar 1 2022, 04:48 AM
Superhawk996
If you wanted to remove that wire from service, f... Mar 1 2022, 07:25 AM advman89 Thank you all for the replies.
The Car is a 1971 ... Mar 1 2022, 09:13 AM advman89
Gotcha. Check this out!
Opened the connect... Mar 1 2022, 11:33 PM Superhawk996 :trophy: Nice job getting that out of there. Hope... Mar 2 2022, 06:57 AM advman89 I checked all the adjacent wires and there are no ... Mar 2 2022, 08:21 AM Superhawk996
I checked all the adjacent wires and there are no... Mar 2 2022, 08:48 AM advman89 Here are some photos...
PIN 12 (depending on diag... Mar 2 2022, 12:27 PM ejm That power distribution junction block was only us... Mar 2 2022, 05:44 PM advman89
That power distribution junction block was only u... Mar 3 2022, 09:56 AM Costa05
I have a 73 and dont have that screw post conne... Mar 2 2022, 05:59 PM Superhawk996 I'm out of my league based on the photos becau... Mar 2 2022, 02:01 PM advman89 Mine is a 71. I don't know if there are a lot ... Mar 2 2022, 03:55 PM 914sgofast2
Mine is a 71. I don't know if there are a lot... Mar 2 2022, 05:54 PM Superhawk996 is this a 914-6? Mar 2 2022, 04:02 PM barefoot I had to install a complete replacement harness in... Mar 3 2022, 07:39 AM Costa05
I had to install a complete replacement harness i... Mar 3 2022, 08:13 AM johnorm
I had to install a complete replacement harness i... Mar 23 2023, 11:43 AM Superhawk996 I hate to admit this since I generally think the e... Mar 3 2022, 08:48 AM advman89 ...and now I'll be adding in fuseblock near th... Mar 3 2022, 05:42 PM anderssj That power distribution block is there on my ... Mar 3 2022, 07:43 PM advman89 The ground block was removed last night, wires pro... Mar 4 2022, 08:50 AM advman89 Fuse block is in place. I feel better. Thank you a... Mar 14 2022, 12:19 PM VaccaRabite
Fuse block is in place. I feel better. Thank you ... Mar 16 2022, 12:00 PM ClayPerrine
Fuse block is in place. I feel better. Thank you... Mar 16 2022, 02:26 PM Geezer914 Did the Ford solenoid for the starter and 4 fuses ... Mar 23 2023, 03:47 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 29th April 2024 - 09:07 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.