Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Tie Rod Fork, Positioning correctly
Rod911964
post Jun 26 2022, 10:17 AM
Post #1


Newbie
*

Group: Members
Posts: 12
Joined: 21-December 19
From: Buffalo
Member No.: 23,752
Region Association: None



Need some advise/help concerning 914 tie rods
Car:1974 Porsche 914 1.8l
Concern needing help: driving the other day and notice a “new noise” coming from the left front wheel. Only occurs when making a right turn. I immediately suspect wheel bearing. I bring it home , raise the wheel and jostle the wheel for free play. There is none. But I do hear a “clunking” noise when attempting to move the wheel. The source of the noise is on the left tieRod at the fork to the steering rack.
So I put the car on the lift and compare the left side to the right side. I also consult the Hayes Manual.
The manual indicate both right and left side tieRod fork to steering rack to be in a lateral orientation. I notice on my care the left is in a vertical position and the right is in a lateral position. I would think the left side is experiencing significant stress at this union.
How do I correct/position the left side tieRod fork to steering rack union? Or doesn’t it matter )I don’t think so.
See attached pics. 1st pic is the left side, 2nd is the right side.
Thanks in advance.
Attached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 29th April 2024 - 02:37 AM