 901.108.126.01, Carburettor 40 IDT P 1 3 C Cylinder 1-3 |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
Posts in this area are restricted to the following format. If you have a general question, please post it in the Garage.
1. All new threads MUST be titled with a part number only. (i.e. 901.351.801.17)
2. Thread description should be an english description of the part. (i.e. Brake Dust Shields)
3. Replies to the thread are only restricted by pertinence. Some examples are original finish of the part (painted, cad plated, etc), common failures (cracking at the mount points), repair information or tips, pictures (stock or custom), upgrades, etc.
If you have any questions regarding the rules of this forum, please PM McMark.
  |
| DennisV |
 Oct 13 2022, 11:32 AM
Post
#1
|
|
Member  Group: Members Posts: 468 Joined: 8-August 20 From: Santa Rosa, CA Member No.: 24,575 Region Association: Northern California 
 |
Porsche utilized Weber IDTP on more than one model of car, with subtle distinctions.
The 914-6 part number adds a "1" after IDTP, whereas the 911T does not. 914-6 70-76
911T 69-
There is very little difference, per Paul Abbot from Performance Oriented: QUOTE The Webers themselves look identical from IDTP to IDTP1, the only real difference is the location of the main fuel jet installation. The main fuel jet location for the middle barrel is towards the front of the car so for 914/6 the location of the main fuel jet is relocated from that of the 911, nothing more that that and a part number difference. |
   |
 
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd May 2024 - 01:21 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.