New Engine Time!, First drive on 4/23/23! |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
New Engine Time!, First drive on 4/23/23! |
VaccaRabite |
Mar 17 2023, 09:03 AM
Post
#1
|
En Garde! Group: Admin Posts: 13,596 Joined: 15-December 03 From: Dallastown, PA Member No.: 1,435 Region Association: MidAtlantic Region |
About 18ish months ago I bought into a new engine program Eric and PMB were starting up. If you have seen me in person I've probably talked your ear off about it. Sorry about that, I've been pretty excited.
Mine is No2 off their line, and its crated up in Utah waiting for the shipper to pick it up. So its really real time here in Dallastown, and I've started getting my 2056 ready to come out. The new engine! (IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-1435-1679065407.1.jpg) (IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-1435-1679065409.2.jpg) I *think* (and could be wrong) that Eric also used my motor as the promotional model for Facebook and his Web storefront - though that could have been Risdal's engine which was right behind mine. Eric and Larry did a lot of testing on the #1 engine in Jim's car, got a lot of driving data at Red Rocks last fall, and then had to wait on components to come in that resulted from that real world testing. My engine was crated last week. I asked Eric to include some other things (including his new brake lines and new pads), paid the final invoice for parts and shipping and the engine will hopefully be in my garage next week! @Stratplayer @Eric_Shea |
VaccaRabite |
Apr 19 2023, 08:28 PM
Post
#2
|
En Garde! Group: Admin Posts: 13,596 Joined: 15-December 03 From: Dallastown, PA Member No.: 1,435 Region Association: MidAtlantic Region |
So close but no cigar tonight. (IMG:style_emoticons/default/headbang.gif)
(IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-1435-1681957691.1.jpg) Got the breather hoses into place. Had to scrounge for a nut, but only found a wingnut. That will work. Cranked over the engine with no fuel to build oil pressure. But that was going to take a minute and I did not want to wear down my battery. So after making sure I did not have any oil leaks, I added gas to the tank and let the pump build pressure. (IMG:http://www.914world.com/bbs2/uploads_offsite/live.staticflickr.com-1435-1681957691.2.jpg) But there was no fuel pressure. Despite the fact that I heard the pump freewheel, then labor. So I turned the key off, and let it go through the prime cycle again. This time I was getting bubbles in the tank letting me know excess fuel was going down the return line. Still no pressure at the gauge. So, I have the feed and return lines miss-plumbed. Which actually means I have the feed and return lines wrong under the tank. Fuck that, I'll fix it in the engine bay. I also found that I have a slight weep coming from what is supposed to be the return line (but which is currently the feed line). I need to undo those hoses and switch them anyway. I'm tired, and I need to let fuel pressure bleed away anyway. So this will be a tomorrow job - IF I have time tomorrow. I'm a little grumpy about this. I was pretty damn sure I'd be posting a first start video tonight. But that's okay. Zach |
Lo-Fi Version | Time is now: 4th December 2024 - 03:49 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |