![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() ![]() |
![]() |
raw1298 |
![]()
Post
#1
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 616 Joined: 9-March 09 From: Rocklin,Ca. Member No.: 10,148 Region Association: Northern California ![]() |
I am getting ready for the interior and was disassembling the door panels. I am looking for the top bolster of door panel. Mine have crumbled. Is there a source for that top bolster?
|
fiacra |
![]()
Post
#2
|
Person.Woman.Man.Camera.TV ![]() ![]() ![]() Group: Members Posts: 542 Joined: 1-March 19 From: East Bay Region - California Member No.: 22,920 Region Association: Northern California ![]() ![]() |
I don't know of a way to get that separately but someone can correct me if I'm wrong. I just got the complete door panel kit from 914rubber. I'm sure you know that you can also try a WTB ad. Good luck.
https://914rubber.com/complete-door-panel-kit |
mepstein |
![]()
Post
#3
|
914-6 GT in waiting ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 19,847 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region ![]() ![]() |
If you have a ‘70, they are separate from the rest of the door card. Anything else is one piece and has to be taken apart and reupholstered.
|
Mikey914 |
![]()
Post
#4
|
The rubber man ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 12,767 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None ![]() ![]() |
As mentined , the early can be rebuilt, as there is a metal section on top (like we make ours).
The late disintegrate as you descrube. I do have new ones and even complete panels. https://914rubber.com/complete-door-panel-kit KIT I have others too. Base only https://914rubber.com/new-door-timber-w-metal-bolster-set Attached thumbnail(s) ![]() ![]() |
raw1298 |
![]()
Post
#5
|
Senior Member ![]() ![]() ![]() Group: Members Posts: 616 Joined: 9-March 09 From: Rocklin,Ca. Member No.: 10,148 Region Association: Northern California ![]() |
I left a massage on your phone. I have the timbers, just need the bolsters.
|
mepstein |
![]()
Post
#6
|
914-6 GT in waiting ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 19,847 Joined: 19-September 09 From: Landenberg, PA/Wilmington, DE Member No.: 10,825 Region Association: MidAtlantic Region ![]() ![]() |
As mentined , the early can be rebuilt, as there is a metal section on top (like we make ours). The late disintegrate as you descrube. I do have new ones and even complete panels. https://914rubber.com/complete-door-panel-kit KIT I have others too. Base only https://914rubber.com/new-door-timber-w-metal-bolster-set Mark - The really early are two separate pieces. They attach individually on the door. ‘70 only. |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 25th April 2025 - 11:18 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |