Speedo gear stripped?, Lost my speedo |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Speedo gear stripped?, Lost my speedo |
Quinn Moore |
Mar 29 2024, 05:53 PM
Post
#1
|
Qmoore Group: Members Posts: 107 Joined: 13-July 21 From: Fox River Grove, IL Member No.: 25,718 Region Association: Upper MidWest |
Didn't actually lose my speedo.....lost functionality. (I know where the guage is).
This evening's drive, heard a "noise" coming from the guage area. Then it stopped for awhile, and started producing the noise again....and speedo needle was rather erratic. So I pulled over, pulled the speedo out and disconnected the cable. It looks to me like the square female end on the speedo isn't square anymore...cable end looks fine. Bad pic of the speedo end. What are my options? Can I replace the square recepticle end on the speedo? I'll also add, I have noticed a slight bounce in the needle for as long as I've owned the car. 3yrs. Tips, comments, remedies are appreciated. Thx. |
Shivers |
Mar 29 2024, 08:42 PM
Post
#2
|
Senior Member Group: Members Posts: 2,365 Joined: 19-October 20 From: La Quinta, CA Member No.: 24,781 Region Association: Southern California |
North Hollywood Speedometer can fix it. I would dig and find my 120 mph speedo for parts. But I'm cheap
|
Tonyooc |
Mar 31 2024, 02:57 PM
Post
#3
|
1974 2.0 Group: Members Posts: 467 Joined: 6-January 18 From: Fort Mill, SC Member No.: 21,763 Region Association: South East States |
I found an independent person who rebuilt them at his house in the Los Angeles area. I can look up his name if your interested. Let me know.
|
Quinn Moore |
Mar 31 2024, 05:54 PM
Post
#4
|
Qmoore Group: Members Posts: 107 Joined: 13-July 21 From: Fox River Grove, IL Member No.: 25,718 Region Association: Upper MidWest |
Thanks for the recommendations. Took the speedo out yesterday, cleaned the end of drive. Lotta gunk in there. Turns out it's not stripped. I did recently have the speedo out to replace the bulbs with led bulbs. I must not have tightened the ring nut enough.doh!.... Reinstalled it and made sure the nut was tight (channel locks).....went for a 30 mile drive, all good.
Self-inflicted. QM |
Lo-Fi Version | Time is now: 2nd May 2024 - 10:48 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |