 Machine shop News, case stuff, and Con Rods? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Dead Air |
 Sep 8 2005, 08:09 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,268 Joined: 9-May 04 From: Buffalo, NY Member No.: 2,042  |
Took the 2.0 to North east Machine shop last week.
their link Here's the news: Check align bore: Good Turn and polish crank: One over Magna flux (or whatever it's called) to test for cracks: Good Install threaded galley plugs: No problem Soak and clean case: Nice and shiney! Measure con rods: two are good, two are bad. Find and balance two new rods. Can you recommend a replacement? Find bearings "one over". $425.00 for the work and the rods. Sound reasonable? |
   |
 
|
Posts in this topic
Dead Air Machine shop News Sep 8 2005, 08:09 AM
Jake Raby I have about 600 stock rods... I should have two t... Sep 8 2005, 08:47 AM Cap'n Krusty "Find" bearings. How hard is that? You look in t... Sep 8 2005, 09:14 AM Jake Raby Imagnaflux cranks before having them turned into s... Sep 8 2005, 10:43 AM sean_v8_914 3 of my 4 cases needed align boring. the rear mai... Sep 8 2005, 10:53 AM Dead Air I asked them to Magna-flux the case, not the crank... Sep 8 2005, 11:18 AM Aaron Cox wtf happened to that rod? Sep 8 2005, 11:26 AM Dead Air ... Sep 8 2005, 11:29 AM Jake Raby Ummn, you can't magnaflux a case...... Only fe... Sep 8 2005, 11:48 AM Dead Air Whoa, guys!
Don't be so tuff on the old ... Sep 8 2005, 01:43 PM Jake Raby No email.. If it was sent through the store rebecc... Sep 8 2005, 01:49 PM Dead Air e mail sent Sep 8 2005, 02:08 PM Jake Raby Dave,
no email received.. Sep 8 2005, 04:43 PM Dead Air Eight fourty five PM eastern time. No email from ... Sep 8 2005, 06:45 PM sean_v8_914 jake:
the type 4 store does not recognize those pa... Sep 8 2005, 06:59 PM Jake Raby Dave,
I just looked in the queue for store emails ... Sep 8 2005, 08:02 PM Jake Raby Sean,
I saw your question... The numbers/parts you... Sep 8 2005, 08:20 PM sean_v8_914 great thanks
align bore price please? I have 2 mor... Sep 9 2005, 08:38 PM sean_v8_914 ? http://www.914world.com/b... Sep 12 2005, 06:14 PM
Dead Air Well, the case is done at the shop.
Grind the cra... Oct 5 2005, 08:16 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 10:51 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.